On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Huanyu HY-MMG-1 Grinder9.6/10View on Amazon - 2
Victoria 12 Cast Iron Grinder9.5/10View on Amazon - 3
Huanyu ZYW-105C Grinder9.5/10View on Amazon - 4
Chard HG-8 Tin-Coated Grinder9.4/10View on Amazon
A freezer full of venison and a bucket of pork shoulder make the cast iron vs stainless meat grinder question practical rather than philosophical. These four listings were compared strictly on what each listing publishes, with two tin-coated cast iron units on one side and two stainless steel units on the other.
HarvestGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick verdict: pick the stainless side if easy cleaning and rust resistance matter most. The Huanyu HY-MMG-1 example states food-grade stainless steel across all components, CE certification, and dishwasher-safe grinding plates and cross blades, and the ZYW-105C example states dishwasher-safe detachable components with a one-piece stainless casting. Pick the cast iron side for the traditional heavy build and the only stated warranty here: the Victoria No. 12 example lists double-tin plated cast iron, two cutting plates and a 90-day limited warranty, while the Chard HG-8 example keeps it simple with a #8 head and three stuffing tubes.
Four examples
| # | Product | Harvest Score | Buy |
|---|---|---|---|
| 1 | Huanyu HY-MMG-1 Grinder | 9.6/10 | Buy on Amazon |
| 2 | Victoria 12 Cast Iron Grinder | 9.5/10 | Buy on Amazon |
| 3 | Huanyu ZYW-105C Grinder | 9.5/10 | Buy on Amazon |
| 4 | Chard HG-8 Tin-Coated Grinder | 9.4/10 | Buy on Amazon |

Huanyu HY-MMG-1 Grinder
A manual stainless steel grinder with food-grade construction across all components, CE certification, sausage tubes and dishwasher-safe plates and blades.
Pros
- Food-grade stainless steel across all components, stated to resist rust and corrosion
- CE certification stated, the only third-party marking among the four listings
- Grinding plates and cross blades stated as dishwasher safe, with effortless disassembly
- Sausage tubes, spare shaft sleeve, cleaning brush, food pusher and English manual included
Cons
- No weight is stated
- No dimensions stated beyond the 0.39 to 1.80 inch clamp opening
- Care tips ask for wiping dry and occasional oil on the blades, so it is not maintenance-free
- No warranty term is stated

Victoria 12 Cast Iron Grinder
A manual No. 12 cast iron grinder with sanitary double-tin plating, two cutting plates, three stuffing fillers and a stated 90-day limited warranty.
Pros
- Double-tin plated cast iron stated to resist stains and corrosion
- Two carbon steel cutting plates: fine 3/16 inch and thick 1/2 inch
- Three sausage-stuffing fillers and a self-sharpening stainless-steel knife included
- 90-day limited warranty stated, the only warranty among the four
Cons
- Heaviest of the four at 10 pounds
- First filler size is printed oddly in the listing, so that figure needs care
- No cleaning or care instructions stated
- Table fixed mount with no stated clamp range, so fit is less described

Huanyu ZYW-105C Grinder
A manual No.12 stainless steel grinder with one-piece casting, dishwasher-safe detachable components, two sieve plates and a full accessory set.
Pros
- Thickened stainless steel body and parts with one-piece fine casting
- Dishwasher-safe detachable components stated
- Two round sieve plates of different grinding precision, plus two meat pushers
- Biscuit maker accessory, sausage tube, spare shaft sleeve and English manual included
Cons
- Heavier than the Chard at 7.6 pounds
- Clamp fits 0.39 to 1.80 inch tops only
- Care tip asks for regular cooking oil on the knife to prevent rust
- No warranty term is stated

Chard HG-8 Tin-Coated Grinder
A manual tin-coated cast iron hand grinder with a #8 head, a 2 7/16 inch grinding head, three stuffing tubes and a 4.7 pound stated weight.
Pros
- Tin-coated cast iron for heavy duty use, per the title and bullets
- Three sausage stuffing tubes: 3/4, 5/8 and 1/2 inch
- Table clamp fits countertops up to 1 1/2 inches thick
- Fully disassembles for clean-up, at a stated 4.7 pounds
Cons
- Only one grinding plate stated: 1/4 inch thick
- No dishwasher-safe line and no warranty term stated
- Smallest head of the cast iron pair at #8
As an Amazon Associate I earn from qualifying purchases.
Runners-up to consider
LEM Products #10 Cast Iron Clamp-On Hand GrinderCheck price on Amazon
HAWOK Cast Iron Meat Grinder with Tabletop Clamp and HardenedCheck price on Amazon
Weston #12 Electric Meat Grinder & Sausage Stuffer 750 WattCheck price on Amazon
Gourmia Electric Meat GrinderCheck price on Amazon
Cast Iron vs Stainless Meat Grinder: side by side
| Meat Grinder | Harvest Score | Material | Weight | Clamp Fit | Plates and Tubes | Dishwasher Safe | Amazon |
|---|---|---|---|---|---|---|---|
| Huanyu HY-MMG-1 Grinder | 9.6/10 | Stainless steel | Not stated | 0.39-1.80 in | Sausage tubes | Plates and blades stated | View on Amazon |
| Victoria 12 Cast Iron Grinder | 9.5/10 | Cast iron, double-tin plated | 10 pounds | Table fixed mount | 2 plates, 3 fillers | Not stated | View on Amazon |
| Huanyu ZYW-105C Grinder | 9.5/10 | Stainless steel | 7.6 pounds | 0.39-1.80 in | 2 sieve plates, sausage tube | Components stated | View on Amazon |
| Chard HG-8 Tin-Coated Grinder | 9.4/10 | Tin-coated cast iron | 4.7 pounds | Up to 1 1/2 in | 1 plate, 3 tubes | Not stated | View on Amazon |
We list the manufacturer’s stated figures without changes, as of 22 October 2026.
What the two sides are
The cast iron side is tin-coated on both examples. The Chard HG-8 title names tin-coated cast iron, and the Victoria listing describes cast iron with sanitary double-tin plating to resist stains and corrosion. The stainless side is the two Huanyu units: the ZYW-105C bullets describe a thickened stainless steel body and metal parts with one-piece fine casting, and the HY-MMG-1 bullets state food-grade stainless steel across all components. One listing wrinkle: the Chard spec table lists the material as Metal while the title and bullets say tin-coated cast iron, and the title was trusted.
Plates, tubes and what they grind
Cutting plates and stuffing tubes are where the listings differ most. The Chard HG-8 states a #8 grinding head, 2 7/16 inch diameter, with a 1/4 inch thick grinding plate and three sausage stuffing tubes in 3/4, 5/8 and 1/2 inch sizes. The Victoria No. 12 states two carbon steel cutting plates, fine 3/16 inch and thick 1/2 inch, plus three sausage-stuffing fillers in millimeter sizes and a self-sharpening stainless-steel knife. On the stainless side, the ZYW-105C includes two round sieve plates of different grinding precision, two meat pushers, a spare shaft sleeve, a biscuit maker accessory and a sausage tube, while the HY-MMG-1 includes sausage tubes, a spare shaft sleeve and a wide feed inlet. For what they grind, the Victoria names burgers, wild game, venison and sausage, the ZYW-105C names beef, pork, chicken and small bones, and the HY-MMG-1 names beef, pork, chicken, fish, small bones and vegetables.
Weight, clamp fit and cleaning
Weight splits the four: the Victoria is the heaviest at 10 pounds, the ZYW-105C states 7.6 pounds, the Chard HG-8 states 4.7 pounds, and the HY-MMG-1 states no weight. All four mount to the table: the Chard table clamp fits countertops up to 1 1/2 inches thick, both Huanyu units state a steel clamp opening of 0.39 to 1.80 inches with non-slip feet, and the Victoria uses a table fixed mount. Cleaning is the stainless side’s clearest edge: both Huanyu listings state dishwasher-safe parts, while the Chard only notes full disassembly and the Victoria states nothing about cleaning. The ZYW-105C adds a care tip to oil the knife regularly, and the HY-MMG-1 suggests wiping parts dry after washing.
Listing gaps to check
Only one of the four states a warranty: the Victoria 90-day limited term. The Chard spec table’s Metal material entry was set aside in favor of the tin-coated cast iron in the title. The HY-MMG-1 states no weight and no dimensions beyond the clamp range, so its size is the least described here. The Victoria’s first filler size is printed oddly in the listing, so treat that figure with care. None of the listings state a motor; all four are manual, and no electric option is listed.
How to choose the best cast iron vs stainless meat grinder
Decide by cleaning, not just material
Tin-coated cast iron resists rust by coating, stainless by chemistry, and both need care after use. If the dishwasher matters, the stainless side is the only side that states dishwasher-safe parts here. If you like the traditional heavy feel and a stated warranty, the cast iron side answers. Compare hand-crank styles in the hand crank vs electric meat grinder guide.
Count the plates and tubes
Sausage making lives or dies on the accessories. The Chard example states three stuffing tubes, the Victoria states two plates and three fillers, and the Huanyu examples bundle sieve plates, pushers, spare sleeves and sausage tubes. The sausage making grinder guide compares more bundled options.
Check the clamp and the counter
Measure the countertop before ordering: the Chard clamp takes up to 1 1/2 inches, and both Huanyu clamps state a 0.39 to 1.80 inch opening. The Victoria uses a table fixed mount instead of a stated clamp range, so check its fit against your own table.
In the Preserving Kitchen
- Disassemble the grinder right after use; the Chard listing notes full disassembly for quick clean-up.
- Wash and dry every part before storage, and follow the ZYW-105C tip to oil the knife regularly.
- Pat meat dry and cut it into long strips before grinding, per the HY-MMG-1 tips, for smoother feeding.
- Keep the plates, tubes and pushers with the grinder so the set stays complete between seasons.
How the Harvest Score played out
| Product | Harvest Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Huanyu HY-MMG-1 Grinder | 9.6 | 30 | 22 | 21 | 7 | 0 |
| Victoria 12 Cast Iron Grinder | 9.5 | 28 | 21 | 20 | 4 | 2 |
| Huanyu ZYW-105C Grinder | 9.5 | 29 | 22 | 21 | 5 | 0 |
| Chard HG-8 Tin-Coated Grinder | 9.4 | 27 | 20 | 19 | 0 | 0 |
Shown scores begin at 9.2 and stop at 9.8. Where a pick lands depends only on its weighted total: more points, never a lower result.
The Harvest Score weighs performance, build, value, safety and warranty. For meat grinders, safety covers the stated features that keep grinding safe and sanitary: the CE certification and food-grade stainless on the HY-MMG-1, the one-piece casting and non-slip feet on the ZYW-105C, and the sanitary double-tin plating on the Victoria. The stainless units score higher for their dishwasher-safe parts and fuller accessory lists, while the Victoria earns the only warranty points for its stated 90-day term. The published score table shows the raw totals, and How we pick explains the weights.
FAQ: preserving at home
Are these grinders electric?
No. All four listings describe manual grinders: the Chard and Victoria are hand grinders, and both Huanyu units are hand crank models.
Which grinder is easiest to clean?
The stainless side. Both Huanyu listings state dishwasher-safe components or parts, while the cast iron listings state only disassembly or nothing about cleaning.
What accessories come with the Victoria No. 12?
The listing states three sausage-stuffing fillers, two carbon steel cutting plates in fine 3/16 inch and thick 1/2 inch, and a self-sharpening stainless-steel knife.
Which listing states a warranty?
Only the Victoria, with a 90-day limited manufacturer warranty. The other three listings state no warranty term.
More preserving guides
See every harvest processing guide and the 8 vs 12 meat grinder comparison for size choices.
More picks: small meat grinders, deer processing grinders and grinders for beginners.





