Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
How Big Is a Bottle Cap? Crown Cap Size Guide
Home Brewing and Wine

How Big Is a Bottle Cap? Crown Cap Size Guide

How big is a bottle cap? A standard crown cap measures 26mm across, and the cappers in this guide fit that size, with caps included in most sets.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1FastRack Red Baron CapperFastRack Red Baron Capper9.6/10View on Amazon
  2. 2WENNING WN005 Steel CapperWENNING WN005 Steel Capper9.6/10View on Amazon
  3. 3WENNING WN002 ABS CapperWENNING WN002 ABS Capper9.6/10View on Amazon
  4. 4HETOETF Double Lever CapperHETOETF Double Lever Capper9.5/10View on Amazon

How big is a bottle cap? A standard beer bottle cap is the crown cap, and it comes in a standard size that every capper in this guide fits. If you brew at home, the cap size decides the capper, the caps and the bottles, so this guide starts with the measurement and then lines up the cappers that fit it.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

FastRack Red Baron Capper

FastRack Red Baron Capper

FastRack9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bench-top capper with a magnetic bell that fits 26mm crown caps and bolts down for steady capping.

Pros

  • Magnetic bell holds the 26mm cap in place before capping
  • Self-adjusting spring-mounted lever for quick and accurate capping
  • Bolt-down holes and a non-slip base hold the bottle in place

Cons

  • No warranty term is stated
  • Capper only, with no caps in the box
  • Bench-top size needs a flat surface to bolt down
WENNING WN005 Steel Capper

WENNING WN005 Steel Capper

WENNING9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A tempered steel manual capper with a magnet and 150 26mm crown caps for homebrewing.

Pros

  • Tempered steel with zinc plating for long-term use
  • 150 26mm crown caps included
  • Caps a bottle in 1 to 3 seconds, per the maker

Cons

  • No warranty term is stated
  • Suits single-edge neck non-threaded bottles only
  • Red color only in this listing
WENNING WN002 ABS Capper

WENNING WN002 ABS Capper

WENNING9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An ABS manual capper with a magnet, spring-loaded arms and 150 26mm crown caps for homebrewing.

Pros

  • 150 26mm crown caps included
  • Magnet holds the cap in place before capping
  • Spring-loaded arms and a magnet for quick, easy capping

Cons

  • ABS body rather than steel
  • 26mm caps only, so other cap sizes need different caps
  • Handheld press with no bench mount, unlike the bench-top FastRack
HETOETF Double Lever Capper

HETOETF Double Lever Capper

HETOETF9.5/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A double lever hand capper with a magnet and 144 26mm crown caps for homebrewing.

Pros

  • Two lever handles and a magnet for stability when capping
  • 144 26mm crown caps included
  • Center push head magnet holds caps in place while installing

Cons

  • 144 caps, fewer than the 150-cap sets
  • ABS material, not steel
  • Fits standard 26mm crown caps and non-threaded bottles only

As an Amazon Associate I earn from qualifying purchases.


How Big Is a Bottle Cap?

A standard crown cap measures 26mm across. Every capper in this guide fits 26mm crown caps, and the FastRack Red Baron uses a 26.5mm capping bell that sits over the 26mm cap. The bell sits over the cap and presses it onto the bottle neck when you push the handle down. Match the cap to the capper, since each capper here is built for 26mm caps.

Match the Capper to the Bottle

The cappers here fit non-threaded bottles with a single-edge neck. The WENNING listings name beer bottles, soda pop bottles, lemonade glass bottles and champagne bottles, and the HETOETF listing names standard beer bottles, soda pop bottles and champagne bottles. Check the neck of your bottles before you buy, since these cappers are built for non-threaded necks.

Bench-Top or Handheld

The FastRack Red Baron is a bench-top capper with a sturdy base, a head and a piston, and built-in holes let you bolt it down to a flat-surface table for added stability. The WENNING and HETOETF cappers (on Amazon) are handheld presses with a magnet that holds the cap in place before capping. A bench-top capper stays put while you work, and a handheld press stores and carries easily. Our bench capper vs wing capper comparison walks through the two styles.

Caps Included or Bought Separately

3 of the cappers here come with caps in the box: the WENNING cappers each include 150 26mm crown caps, and the HETOETF capper includes 144 26mm crown caps. The FastRack Red Baron (on Amazon) lists the capper only, so pair it with 26mm crown caps of your own. Count the caps against the bottles you plan to fill, and keep spare caps on hand for the next batch.

Bottle Cappers for 26mm Crown Caps

The cappers below fit the 26mm crown cap above, so match the capper to the bottles you brew.

FAQ: preserving at home

What size is a standard bottle cap?

A standard crown cap measures 26mm across. The FastRack bell measures 26.5mm and sits over the 26mm cap, and every capper in this guide fits 26mm crown caps.

Do bottle cappers come with caps?

The WENNING cappers each come with 150 26mm crown caps, and the HETOETF capper comes with 144 26mm crown caps. The FastRack Red Baron lists the capper only, so buy caps with it.

What bottles fit a 26mm capper?

Non-threaded bottles with a single-edge neck, such as beer bottles, soda pop bottles, lemonade glass bottles and champagne bottles. Check the neck of your bottles before you buy.

How long does capping take?

The WENNING WN005 (on Amazon) listing states an average of 1 to 3 seconds to complete a capping, with a magnet that holds the cap in place before capping.

FastRack Red Baron Capper
Still deciding? Our top pickFastRack Red Baron Capper
Check price on Amazon

More preserving guides

See every home brewing guide and all beer brewing guides.

More picks: bench capper vs wing capper, bottle capper vs bench capper and homebrew kettle vs stock pot.

Read next in the kitchen