On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Lesbima Garlic Press Rocker Set9.6/10View on Amazon - 2
KITCHENDAO Garlic Press9.5/10View on Amazon - 3
TTYGRHQ 3-Pack Cleaning Brushes9.4/10View on Amazon - 4
Joie Spud Dude Potato Brush9.4/10View on Amazon
A basket of garlic heads waits on the counter after a day in the garden, and dinner needs minced garlic before the pan heats. How to clean garlic press is the question that follows every clove: push the leftover garlic out, rinse the press under running water, brush the holes, and dry it before it goes back in the drawer. Running water and a small brush handle the whole job, and the gear below covers each part of it.
HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | Harvest Score | Buy |
|---|---|---|---|
| 1 | Lesbima Garlic Press Rocker Set | 9.6/10 | Buy on Amazon |
| 2 | KITCHENDAO Garlic Press | 9.5/10 | Buy on Amazon |
| 3 | TTYGRHQ 3-Pack Cleaning Brushes | 9.4/10 | Buy on Amazon |
| 4 | Joie Spud Dude Potato Brush | 9.4/10 | Buy on Amazon |

Lesbima Garlic Press Rocker Set
A 304 stainless steel garlic press rocker set with a peeler and a cleaning brush for garlic, ginger, onions and herbs.
Pros
- 304 stainless steel rocker with a silicone handle for a nonslip grip
- Cleaning brush included for the plate, plus a garlic peeler
- Mince garlic, ginger, onions, mushrooms, nuts, herbs and spices
Cons
- No warranty term is stated
- Rocker style needs a flat surface and a back-and-forth motion
- Works one clove at a time, so large batches take many passes

KITCHENDAO Garlic Press
A zinc alloy garlic press with a built-in scraper and cleaning pusher, 52 holes for even mincing, and a large peel-free chamber.
Pros
- Built-in scraper and cleaning pusher clear the chamber and the 52 holes
- 52 holes for a fine, even paste
- Large chamber holds multiple cloves, with peel-free operation
Cons
- No warranty term is stated
- The 52 small holes need the pusher after each use
- Large chamber suits batches more than a single clove

TTYGRHQ 3-Pack Cleaning Brushes
A 3-pack of stiff nylon cleaning brushes for nooks and crannies, from press holes to grater slots.
Pros
- 3-pack of stiff nylon brushes for nooks and crannies
- PET fiber bristles on a plastic resin handle
- Cleans juicers, graters, bottles, filters and more
Cons
- Brushes only, no press included
- Made for general crevice cleaning, not for garlic presses alone
- 8.2 inch length needs drawer space

Joie Spud Dude Potato Brush
A compact BPA-free produce scrubber with nylon bristles that fits in the palm and stores in a drawer.
Pros
- Nylon bristles scrub produce and press plates under running water
- BPA-free build, dishwasher safe for quick clean-up
- Compact size fits in the palm and in a drawer
Cons
- Made for produce, not for press holes
- Compact 2.75 by 2 inch size covers a small area per pass
- Plastic build, not metal
As an Amazon Associate I earn from qualifying purchases.
How to clean garlic press: the quick answer
Push the leftover garlic out of the chamber with the press scraper or a fingertip, then hold the press under running water and work the holes with a small brush. The KITCHENDAO press (on Amazon) has a built-in scraper and a cleaning pusher for this step, and the Lesbima set includes a cleaning brush. Dry the press right away so water does not sit in the holes, and put it away dry.
Step 1: Push the leftover garlic out
Open the press and push the leftover garlic out of the chamber before it dries. The KITCHENDAO press has a built-in garlic scraper and an integrated cleaning pusher, which clear the chamber and the plate. The Lesbima rocker (on Amazon) leaves the minced garlic collected and ready for use, so lift the rocker and scrape the plate clean. Clearing the bulk keeps the rinse short and the brush work light.
Step 2: Rinse under running water
Hold the press under running water and work the handles open and closed so water reaches the chamber and the holes. The Joie brush (on Amazon) is made for scrubbing under running water, and the Lesbima rocker cleans under the tap or in the dishwasher. Rinse until the water runs clear and no garlic bits stay on the plate.
Step 3: Brush the holes
A small brush reaches the holes that water alone leaves behind. The TTYGRHQ set has stiff nylon brushes for nooks and crannies, and the Lesbima set includes a cleaning brush for the rocker plate. The KITCHENDAO cleaning pusher presses through the 52 holes to clear what the brush misses. Brush each side of the plate, then rinse again.
Step 4: Dry it before storing
Shake the water off, then dry the press with a clean towel and leave it open to air dry. The KITCHENDAO zinc alloy body, the Lesbima stainless steel rocker and the Joie brush all dry with a towel, and the brush stores in the drawer beside the press. A dry press stays ready for the next clove, and a dry brush stays ready for the next wash.
The gear that makes it easier
The press itself does the mincing, and the brushes do the cleaning: the KITCHENDAO and Lesbima presses carry their own cleaning tools, while the TTYGRHQ brush (on Amazon) set and the Joie scrubber handle the holes and the plate.
How to choose cleaning gear for a garlic press
Match the brush to the holes
The KITCHENDAO pusher fits its own 52 holes, and the TTYGRHQ stiff nylon brushes reach into nooks and crannies. A brush that is too soft skims over dried garlic, so pick stiff bristles for the plate and a small head for the chamber. The Joie scrubber measures about 2.75 inches long and 2 inches wide, so it fits in the palm and in a drawer.
| Tool | What it cleans | Material | Amazon |
|---|---|---|---|
| KITCHENDAO garlic press | Chamber and 52 holes | Zinc alloy | View on Amazon |
| Lesbima rocker set | Plate, with brush | 304 stainless steel | |
| TTYGRHQ brush set | Nooks and crannies | PET fiber bristles | |
| Joie scrubber | Plate and produce | Nylon bristles |
Dishwasher or hand wash
The KITCHENDAO press, the Lesbima rocker and the Joie brush are all dishwasher safe, so they can go in with the plates. The TTYGRHQ brushes are made for hand cleaning. Rinse the press right after use either way, before the garlic dries on the plate.
For the pressing itself, see the how to use a garlic press guide, and for more brush options see the jar cleaning brush picks.
FAQ: preserving at home
Can a garlic press go in the dishwasher?
Yes. The KITCHENDAO press, the Lesbima rocker and the Joie brush are dishwasher safe. Rinse the press before it goes in so loose garlic does not stay in the holes.
How does garlic come out of the small holes?
Push the cleaning pusher through the holes, or work a stiff brush over the plate. The KITCHENDAO pusher fits its own 52 holes, and the TTYGRHQ stiff nylon brushes reach into nooks and crannies.
Does garlic need peeling before pressing?
No. The KITCHENDAO press works peel-free, with a large chamber that holds multiple cloves at a time.
What else can a garlic press rocker mince?
The Lesbima rocker also minces ginger, onions, mushrooms, nuts, herbs and spices. Rinse it the same way after each use.
How should a garlic press be stored?
Dry it with a towel, leave it open to air dry, and store it in a drawer. The Joie scrubber measures about 2.75 inches long and 2 inches wide, so it stores beside the press.
More preserving guides
See every Harvest and Processing guide and all food mill guides.
More picks: how to use a garlic press, garlic press vs mortar and pestle, pressing garlic without a press and silicone garlic peelers.





