Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
How to Clean Salad Spinner: A Step-by-Step Guide
Harvest and Processing

How to Clean Salad Spinner: A Step-by-Step Guide

How to clean salad spinner: take it apart, wash the basket, bowl and lid with soapy water, rinse well, and let every part air dry before storing it.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Lunememo Stainless Steel Salad SpinnerLunememo Stainless Steel Salad Spinner9.6/10View on Amazon
  2. 2SveBake Stainless Steel Salad SpinnerSveBake Stainless Steel Salad Spinner9.6/10View on Amazon
  3. 3OXO Good Grips Glass Salad SpinnerOXO Good Grips Glass Salad Spinner9.6/10View on Amazon

How to clean salad spinner: take the spinner apart, wash the basket, bowl and lid with soapy water, rinse each part well, and let every part air dry before you put the spinner back together. Greens leave grit and moisture behind after every spin, and a spinner that goes back on the shelf while still damp can hold odors and feel slimy to the touch. This guide walks through the parts, the wash and the drying, with notes for large manual spinners built for big batches of lettuce.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

How to clean salad spinner: the parts to wash

Most salad spinners come apart into a few parts: an outer bowl, an inner basket, a lid and a drive part such as a crank or a handle. Each part needs washing, because grit settles in the bowl while leaf bits catch in the basket and around the lid. The table below lists each part and what to do with it.

Part What to wash Watch for
Outer bowl Soapy water inside and out Grit rings near the base
Inner basket Soapy water through the slots Leaf bits caught in the mesh
Lid and crank Wash the lid, crank and handle Moisture around the drive parts
Drain tube Run soapy water through, then rinse Water left sitting inside the tube

Take the spinner apart

Lift the lid off, lift the basket out of the bowl, and set each part on the counter. If your spinner has a drain tube, pull it free from the bowl so water can run through it while you wash. Keep the small parts together so nothing rolls away: the lid, the crank or handle, and the basket all wash on their own, and washing them apart is what gets the grit out of the seams.

Large commercial spinners come apart the same way, with bigger parts. The Fnova model lists a 6.6 gallon bowl, or 26.42 quarts, and a 4.92 ft drain tube, so set it near the sink before you start and give the tube room to hang while it drains. The Wutfly model lists a 5 gallon bowl, so it also needs counter space for the basket and the bowl side by side.

Wash the basket, bowl and lid

Fill the sink or a basin with soapy water and wash the bowl inside and out, then the basket, then the lid. A soft cloth or sponge reaches the slots in the basket and the rim of the bowl, where grit collects. Rinse each part under running water until the water runs clear and no soap film is left. For the lid and the drive parts, wash the outside well and wipe around the crank or handle, where leaf bits and water collect.

Greens that hold a lot of grit need a rinse before they go in the spinner at all, and a basket that still holds leaf bits after washing needs another pass with the cloth. Our salad spinner uses guide covers washing and drying produce, and the how a salad spinner works guide explains the basket and bowl layout.

Rinse and dry every part

Shake the water off each part, then set the basket upside down on a rack or a clean towel so air can move through the slots. Stand the bowl on its side or upside down, and leave the lid open so the inside dries. A spinner stored while damp can hold odors, so let every part dry fully before you put it back together. In a warm kitchen the parts dry on their own; in a cool kitchen, a towel finish on the bowl and lid speeds the job.

Clean a large manual spinner

Large manual spinners need the same wash, with more room and a little more care around the drive. The Fnova lists a food-grade plastic body and a stainless steel crank, with anti-slip feet that hold the bowl in place while you spin, and it lists room for 8 to 9 heads of lettuce at a time. Wash the crank and the feet with the rest of the parts, since both sit near the water line, and rinse the 4.92 ft drain tube so no wash water stays inside it. The Wutfly lists a 5 gallon bowl with a drain design that releases collected water after spinning, so tip the bowl and let the drain do its work before you wash.

For either model, wash the basket on its own and look through the slots for leaf bits before drying. A large basket holds more greens, and it also holds more grit, so give it the same attention as the bowl. Compare sizes in our best salad spinner guide, or read salad spinner vs colander if you are deciding which tool suits your kitchen.

What to skip or double-check

  • Dishwasher: do not assume the parts are dishwasher safe; check the maker guidance for your model. Our OXO salad spinner dishwasher guide covers the OXO model.
  • Storing damp: do not put the spinner away while parts are still wet.
  • Crank and handle: wipe around the drive parts, where water and leaf bits collect.
  • Drain tube: hang the tube so water runs out of it fully.
  • Grit in the bowl: rinse the bowl after every use, not only when it looks dirty.

FAQ: preserving at home

Can I put a salad spinner in the dishwasher?

Some models allow it and some do not, so check the maker guidance for your model before you load any part. Hand washing with soapy water suits every model, and it keeps the lid and drive parts out of high heat.

How do I clean a salad spinner that smells?

Take it apart and wash every part with soapy water, including the lid and the crank or handle, then rinse well and let every part air dry fully before you put it back together. Odors come from moisture and leaf bits left in seams, so drying matters as much as washing.

Do I need to take a salad spinner apart to clean it?

Yes, washing the parts apart is what gets the grit out of the bowl and the leaf bits out of the basket slots. A quick rinse of the whole spinner leaves grit behind in the seams.

How do I clean the drain tube on a large salad spinner?

Run soapy water through the tube, rinse it, then hang it so the water runs out fully. The Fnova model lists a 4.92 ft drain tube, so give it room to hang straight while it drains.

How do I dry a salad spinner after washing it?

Shake the water off, set the basket upside down on a rack or a clean towel, and leave the lid open so air reaches the inside. Wait until every part feels dry before you put the spinner back together and store it.

More preserving guides

See every Harvest and Processing guide and all Harvest Guides guides.

More picks: best salad spinner, how to use an OXO salad spinner, OXO salad spinner cleaning guide and what makes a good salad spinner.

Read next in the kitchen