On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Otstar 6 in 1 Opener9.6/10View on Amazon - 2
HUMANFUN 3-Piece Set9.6/10View on Amazon - 3
Wahijihe Adjustable Opener9.5/10View on Amazon - 4
LUTER Gripper Pads 4pcs9.5/10View on Amazon
A counter full of tomatoes and a pantry shelf of sealed jars is the payoff of a long summer in the garden, and the seal that keeps the food safe is also the seal that fights back at supper time. Learning how to get canning lid off a jar without a knife and without chipping the rim takes a grip tool that fits the lid and a little leverage.
HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | Harvest Score | Buy |
|---|---|---|---|
| 1 | Otstar 6 in 1 Opener | 9.6/10 | Buy on Amazon |
| 2 | HUMANFUN 3-Piece Set | 9.6/10 | Buy on Amazon |
| 3 | Wahijihe Adjustable Opener | 9.5/10 | Buy on Amazon |
| 4 | LUTER Gripper Pads 4pcs | 9.5/10 | Buy on Amazon |

Otstar 6 in 1 Opener
A 6 in 1 opener with eight circular openings for lids 1-3 inches, plus hooks for large lids and ring pull cans; it handles the grip and seal-breaking steps.
Pros
- Eight circular openings fit lids 1-3 inches in diameter
- Hook breaks the air tightness on large lids such as pickle jars
- Long handle and rubber lining give a firm, non-slip grip
Cons
- No warranty term is stated
- Dimensions of 3.54 x 3.54 x 9.0 inches make it the longest tool here

HUMANFUN 3-Piece Set
A 3-piece set with a 4-in-1 jar opener, a 5-in-1 bottle opener and a non-slip gripper pad; it handles jars, bottles and cans in one set.
Pros
- 3-piece set covers jars, bottles, cans and vacuum sealed jars
- Long handles give leverage, and non-slip handles hold even when wet
- Gripper pad adds grip for smooth ridge lids such as peanut butter
Cons
- Title says 5 in 1 while the packaging lists a 4-in-1 jar opener, a 5-in-1 bottle opener and a gripper pad
- No warranty term is stated
- No materials are stated beyond the rubber gripper pad

Wahijihe Adjustable Opener
An adjustable stainless steel opener with a rubber gear sleeve; it handles lids of any size by adjusting the grip to the lid.
Pros
- Adjustable grip fits lids of any size, per the listing
- Stainless steel body with a removable rubber gear sleeve
- Opening wing locks in place, then the cap turns counterclockwise
Cons
- No warranty term is stated
- Listing gives no figure for the smallest or largest lid it fits

LUTER Gripper Pads 4pcs
4 rubber gripper pads in 2 shapes that add friction to the lid; they handle the grip step for most jars and bottles.
Pros
- 4pcs in 2 shapes: square pads about 5 x 5 inch and round pads about 4.92 inch
- Textured rubber surface adds friction for a firm grip
- Pads also serve as heat insulation coasters and anti-scalding mats
Cons
- No warranty term is stated
- Pads give grip only; they add no leverage for a tight seal
As an Amazon Associate I earn from qualifying purchases.
How to get canning lid off: the short list
Most stuck lids give way to grip and leverage, not force. The table lines up the openers in this guide by what each one does and which lids it fits.
| Opener | What it does | Lids it fits | Amazon |
|---|---|---|---|
| Otstar 6 in 1 opener | Eight openings plus hooks for large lids and ring pull cans | Lids 1-3 inches, plus large pickle jar lids | View on Amazon |
| HUMANFUN 3-piece set | Jar opener, bottle opener and gripper pad in one set | Small bottles to vacuum sealed jars | View on Amazon |
| LUTER gripper pads, 4pcs | Rubber pads in 2 shapes that add friction | Most jars and bottles | |
| Wahijihe adjustable opener | Stainless steel opener that adjusts to the lid | Any lid size, per the listing | View on Amazon |
Break the seal first
Start by breaking the vacuum seal, since a sealed lid will not twist no matter how hard you grip it. Slide the hook end of the opener under the lid edge and lift gently until you hear the seal release. The Otstar opener (on Amazon) carries a hook for this job, made to break the air tightness on large-size lids such as pickle jars. Do not pry with a knife: the HUMANFUN listing warns against using a knife to open a lid, since a blade can slip or chip the jar rim.
Pick the opening that fits
Fit matters more than force. The Otstar opener has eight sizes of circular openings for lids 1-3 inches in diameter, and the listing says to choose a suitable opening to fit the lid, and to use the third opener ring instead of the fourth for larger lids. A loose opening slips, and a tight opening cannot close on the lid, so match the ring to the lid before you twist.
Twist with the grip, not the wrist
Set the opener on the lid, press down so the rubber lining bites, and turn with the long handle instead of twisting your wrist. The Otstar handle gives leverage, and the rubber lining holds the lid firm. For a smooth lid with no ridge to catch, lay a LUTER gripper pad (on Amazon) on top and twist through the pad: the textured rubber adds friction, and the square pads measure about 5 x 5 inch while the round pads measure about 4.92 inch in diameter. See our how to use jar opener guide for the hand positions.
When the lid still will not move
Break the seal again with the hook, then switch to the adjustable opener. The Wahijihe opener (on Amazon) adjusts its gripping teeth to the cap, the opening wing locks in place, and the cap turns counterclockwise. The HUMANFUN set also covers stubborn jars with its gripper pad, and its long handles give the leverage for lids that resist a bare hand. If the lid still will not move, check that the seal is fully broken before you grip again, since a seal that is still holding will not twist.
Jar openers for the job
The grip step is where the gear comes in: a pad or a handled opener gives the leverage and the non-slip grip that bare hands lack. The picks below cover both forms, ranked by Harvest Score.
What this guide does not cover
This is a lid-opening guide. It does not give recipes, processing times, pressures or storage times. Take those from current USDA and National Center for Home Food Preservation guidance.
FAQ: preserving at home
What size lids does the Otstar opener fit?
The listing states eight sizes of circular openings for lids 1-3 inches in diameter, plus a hook for large-size lids such as pickle jars.
Can a gripper pad open a vacuum sealed jar?
The HUMANFUN set lists vacuum sealed jars such as spaghetti sauce and honey among the containers it opens, and the LUTER pads state they open most sizes of jars and bottles.
Do I need a different opener for small bottles?
The HUMANFUN set includes a 5-in-1 bottle opener and a gripper pad alongside the 4-in-1 jar opener, and the Otstar opener has a straight hook for ring pull cans.
How do I store a jar opener?
The Otstar opener is compact and slim and fits in a kitchen drawer or hangs on hooks, and the Wahijihe opener stores in a drawer or on a wall hook.
More preserving guides
See every canning tools guide and all canning guides.
More picks: canning tool kits, canning jar openers for seniors, canning jar opener vs jar wrench and canning lids.





