Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
How to Use Airlock for Fermentation: A Step-by-Step Guide
Fermentation Kits

How to Use Airlock for Fermentation: A Step-by-Step Guide

How to use airlock for fermentation, with the fitting, water and watching steps explained and four airlock sets compared by size and pack contents.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1GUZE-US Bubble Airlock SetGUZE-US Bubble Airlock Set9.6/10View on Amazon
  2. 2FastRack Twin Bubble AirlockFastRack Twin Bubble Airlock9.6/10View on Amazon
  3. 3Zazolyne S-Shape Airlock 5-PackZazolyne S-Shape Airlock 5-Pack9.5/10View on Amazon
  4. 4Zazolyne 3-Piece Airlock 4-PackZazolyne 3-Piece Airlock 4-Pack9.3/10View on Amazon

A crock of cabbage on the counter is ready to turn into sauerkraut, and the only thing standing between the brine and the open air is a small plastic chamber on the lid. How to use airlock for fermentation comes down to a short sequence: seat the airlock in the lid so it seals, fill the chamber with water, and leave it alone while gas finds its way out and air stays out. This guide walks through each move in order, then compares the airlock sets by fit, pack size and materials so you can match a set to the vessel you already own.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

GUZE-US Bubble Airlock Set

GUZE-US Bubble Airlock Set

GUZE-US9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of bubble airlocks with #6 stoppers and grommets that handles the gas-release step for wine, beer, sauerkraut and pickles, suited to fermenters who want spares on hand.

Pros

  • 4 airlocks, 4 #6 stoppers and 8 grommets in one set, with spares included
  • Food-grade materials with a clear body so the fermentation process is visible
  • Airtight design that vents gas automatically at room temperature without manual control

Cons

  • Airlocks stand 6.7 inches tall, so they need headroom above the vessel
  • No warranty term is stated
  • Stoppers are #6 only, so check that size fits the lid before buying
FastRack Twin Bubble Airlock

FastRack Twin Bubble Airlock

FastRack9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of twin bubble airlocks with universal-fit carboy bungs that handles the gas-release step for beer, wine, mead and kombucha in jugs and carboys.

Pros

  • Twin bubble design lets you watch pressure inside the fermenter
  • Food-grade, transparent plastic, stronger and clearer for easy monitoring
  • Universal-fit carboy bungs are included, so the set fits a jug or carboy

Cons

  • Only 2 airlocks in the pack, fewer than the 4 and 5 packs here
  • No warranty term is stated
  • The cap must stay on top in use, so a tipped vessel can spill the water inside
Zazolyne S-Shape Airlock 5-Pack

Zazolyne S-Shape Airlock 5-Pack

Zazolyne9.5/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-pack of S-shape airlocks with #6 stoppers and grommets that handles the gas-release step for lids on buckets, mason jars and carboys, suited to fermenters who want a complete kit.

Pros

  • 5 airlocks, 5 #6 stoppers and 10 grommets, the largest kit in this guide
  • S-shape airlocks are reusable: drop them in sanitizer and use them again
  • Dust cap has a zigzag grip and 3 buckles inside, and snaps shut with a press

Cons

  • No food-grade or other certification is stated in the listing
  • No warranty term is stated
  • You drill the lid yourself: a 3/8 inch hole for grommets or a 1 inch or 1.28 inch hole for the stopper
Zazolyne 3-Piece Airlock 4-Pack

Zazolyne 3-Piece Airlock 4-Pack

Zazolyne9.3/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of 3-piece airlocks with #6 stoppers and grommets that handles the gas-release step for beer, wine and kombucha.

Pros

  • 4 airlocks with 4 #6 stoppers and 8 grommets in one kit
  • 3-piece design for beer, wine and kombucha brewing
  • FDA transparency upgrade is stated in the title

Cons

  • The listing has no bullets, so details beyond the title are not spelled out
  • No warranty term is stated

As an Amazon Associate I earn from qualifying purchases.


Runners-up to consider

How to use airlock for fermentation: the short list

Most ferments need the same few pieces. The table shows what each one does and when it matters.

Piece What it does Needed for When it matters Amazon
Bubble airlock Lets gas out and keeps air out Every ferment with a lid From the day you seal the jar
Stopper or grommet Seals the airlock into the lid Lids with a drilled hole Before you fill the chamber
Water Fills the chamber so gas bubbles through Every bubble airlock Each time you set the airlock
Jar, carboy or bucket Holds the ferment under the lid Every batch Before you start

Start with the vessel, not the airlock

Before you buy a set, look at the vessel the ferment will live in. A mason jar lid, a bucket lid and a carboy neck each take the airlock differently, and the stopper or grommet has to match the hole you have or the hole you plan to drill. The listings in this guide cover all three: grommets for drilled lids, #6 stoppers for drilled plugs, and universal-fit bungs for a jug or carboy. Our how to use fermentation kit guide walks through the full kit setup if you are starting from a boxed set.

If the vessel already has a hole, measure it against the stopper or grommet sizes in the listings before ordering. If it has none, pick a set that states the drill size for its grommets, and drill the lid before the ferment goes in.

An airlock sized by the lid hole

Airlock size is less useful than the hole it has to seal. The #6 stoppers in these sets list a top diameter of 1.3 inches and a bottom diameter of 0.98 inches, with a height of 1 inch, while the grommets list an inner ring diameter of 0.39 inches and an outer ring diameter of 0.59 inches. The 5-pack Zazolyne set states the drill sizes plainly: a 3/8 inch hole for grommets, or a 1 inch or 1.28 inch hole for the stopper. Pick the size that matches the hole in the lid you already have, and look for a listing that states the hole size rather than leaving you to guess.

Height matters too. The GUZE-US airlocks (on Amazon) stand 6.7 inches tall, so they need headroom above the vessel, while the FastRack twin bubble airlocks measure 3.1496 inches by 1.9685 inches by 3.1496 inches. Check the space above the ferment before you choose a tall set.

Stoppers and grommets

Stoppers and grommets do the sealing work. A #6 stopper plugs a drilled hole in a plug or lid, and a grommet lines a hole drilled straight through a lid so the airlock stem sits snug. The sets here include both: the GUZE-US set packs 4 stoppers and 8 grommets, the FastRack set packs 2 universal-fit bungs, and the Zazolyne sets pack 5 stoppers with 10 grommets and 4 stoppers with 8 grommets. Buy with spares in mind, since a cracked stopper or a stretched grommet sends you back to the box.

Mixing stoppers and grommets across sets is fine as long as the sizes match, but you will need the right hole for each one, so keep the drill sizes from the listings with the lids they belong to.

Fill the chamber with water

With the airlock seated, fill the chamber with water. The FastRack listing puts it plainly: fill the bubbler airlock with water, insert the drilled stopper or bung, and keep the cap on top so gas can escape and the water stays inside if the vessel tips. The chamber is what lets gas bubble out while air stays out, so check the water when you check the ferment, and add more when it runs low.

Plain water is what the listings call for, and nothing in these listings states a fill line, a temperature or a change schedule, so follow the instructions that come with the set you buy. See our water airlock vs silicone fermentation lid comparison if you are weighing a water chamber against a silicone lid.

The airlocks for the job

The airlock handles the step where gas needs a way out while air stays out, so pick a set whose stopper or grommet fits the lid you already have and whose pack size covers the vessels you ferment in.

What to skip or double-check

  • An airlock with no water in the chamber: skip it. Without water the chamber cannot block air from drifting back in.
  • A stopper that does not match the hole: check the #6 size against the lid before you order, since a loose stopper will not seal.
  • A tipped vessel with the cap off: keep the cap on top in use, so the water stays inside if the vessel tips.
  • A set with no stated sizes: check that the listing states the stopper size and the drill size before you treat it as a fit for your lids.
  • Old or cracked stoppers and grommets: check the seal before use, and keep spares from the pack on hand.

What this guide does not cover

This is a how-to-use guide. It does not give recipes, brine ratios, salt quantities or storage times. Take those from current USDA and National Center for Home Food Preservation guidance, or from a current edition of a trusted preserving guide, and follow them exactly for each food. Every fermentation guide on the site is collected in the fermentation kits section.

FAQ: preserving at home

What does a fermentation airlock do?

It lets gas escape from the vessel while keeping air out, so the ferment stays sealed while it bubbles. The airtight design of these sets blocks air and prevents oxidation, and the airlocks vent gas automatically at room temperature without manual control.

How do I fit an airlock into a lid?

Drill the lid to the size the set states, seat the grommet or stopper in the hole, then press the airlock stem into it. The Zazolyne 5-pack states a 3/8 inch hole for grommets and a 1 inch or 1.28 inch hole for the stopper, and the FastRack set fits a jug or carboy with its universal-fit bungs.

Do I need to fill the airlock with water?

Yes. The FastRack listing directs you to fill the bubbler airlock with water before inserting the stopper or bung, and the water in the chamber is what lets gas bubble out while air stays out.

Can I use the same airlock for sauerkraut and wine?

Yes. The GUZE-US set lists wine, beer, sauerkraut, pickles and kimchi among its uses, and the FastRack set lists beer, wine, mead and kombucha, so one set can cover more than one kind of ferment.

How do I know the airlock is working?

Watch for bubbles passing through the water in the chamber, which show gas leaving the vessel. The clear bodies of these sets let you see the whole fermentation process, and the twin bubble FastRack design lets you watch the pressure inside the fermenter.

GUZE-US Bubble Airlock Set
Still deciding? Our top pickGUZE-US Bubble Airlock Set
Check price on Amazon

More preserving guides

See every fermentation kit guide and all fermentation kit picks.

More picks: fermentation kit picks, fermentation weights for quart jars, thermometer for fermentation and water airlock vs silicone lid.

Read next in the kitchen