Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Immersion Chiller vs Plate Chiller: Which One Should You Buy?
Beer Brewing

Immersion Chiller vs Plate Chiller: Which One Should You Buy?

Immersion chiller vs plate chiller, compared on 3 listings: 2 stainless steel coils against a 60-plate exchanger, with cooling speed, cleaning and fittings.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Ferroday 60 Plate Wort ChillerFerroday 60 Plate Wort Chiller9.7/10View on Amazon
  2. 2Vigorous 3/8 x 50 Ft ChillerVigorous 3/8 x 50 Ft Chiller9.6/10View on Amazon
  3. 3Vigorous 3/4 x 25 Ft ChillerVigorous 3/4 x 25 Ft Chiller9.6/10View on Amazon

When the wort is off the boil, immersion chiller vs plate chiller is the choice that decides how the beer gets to fermentation level. A coil in the kettle cools one way, and plates cool another. The short answer is in the verdict that follows.

HarvestGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick verdict: pick an immersion chiller for a simple coil that drops into the kettle; the Vigorous examples are 304 stainless steel coils. Pick a plate chiller for a pumped setup; the Ferroday example has 60 brazed plates and 1/2 NPT and 3/4 NPT threads.

The 3 chillers

Ferroday 60 Plate Wort Chiller

Ferroday 60 Plate Wort Chiller

Ferroday9.7/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60-plate brazed plate chiller in 304 stainless steel with 1/2 NPT and 3/4 NPT threads, made to cool wort from boiling to fermentation level.

Pros

  • 60 brazed plates for increased cooling surface area
  • 304 stainless steel plates with 99.9% copper brazed
  • Standard 1/2 NPT and 3/4 NPT threads fit most home brewing equipment
  • Wort and water ports work with a pump and a tap hose

Cons

  • Cannot be disassembled to clean
  • Needs a filter on the wort to prevent clogging
  • Cannot be used for viscous liquids
  • No warranty term is stated
Vigorous 3/8 x 50 Ft Chiller

Vigorous 3/8 x 50 Ft Chiller

Vigorous9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/8-inch by 50 ft food-grade 304 stainless steel coil for immersion chilling, ice baths and DIY jockey boxes.

Pros

  • 50 ft coil, the longest of the 3 here
  • Food-grade 304 stainless steel meets ASTM A269
  • Corrosion-resistant and easy to keep clean
  • Wide application: wort chilling, ice baths and DIY jockey box

Cons

  • No warranty term is stated
  • No fittings or thread size is stated
  • No weight is stated
  • 3/8-inch tube is narrower than the 3/4-inch coil here
Vigorous 3/4 x 25 Ft Chiller

Vigorous 3/4 x 25 Ft Chiller

Vigorous9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/4-inch by 25 ft food-grade 304 stainless steel coil for immersion chilling and ice baths.

Pros

  • 3/4-inch tube, the widest here
  • Food-grade 304 stainless steel meets ASTM A269
  • Corrosion-resistant and easy to keep clean
  • Very rigid coil that is easy to maintain and install

Cons

  • No warranty term is stated
  • 25 ft coil, shorter than the 50 ft coil here
  • No fittings or thread size is stated
  • No weight is stated

As an Amazon Associate I earn from qualifying purchases.


Runners-up to consider

Immersion chiller vs plate chiller: side by side

Chiller Harvest Score Chiller Type Coil or Plates Material Fittings Amazon
Ferroday 60 Plate Wort Chiller 9.7/10 Plate chiller 60 brazed plates 304 stainless steel 1/2 NPT and 3/4 NPT View on Amazon
Vigorous 3/8 x 50 Ft Chiller 9.6/10 Immersion chiller 3/8 inch coil, 50 ft 304 stainless steel Not stated View on Amazon
Vigorous 3/4 x 25 Ft Chiller 9.6/10 Immersion chiller 3/4 inch coil, 25 ft 304 stainless steel Not stated View on Amazon

Specs below are what each maker states on its listing (gathered 14 November 2026).

What each chiller is for

The immersion chillers are coils that sit in the wort. Vigorous describes both as food-grade 304 stainless steel that meets ASTM A269, corrosion-resistant and easy to keep clean.

The plate chiller is a compact heat exchanger that the wort flows through. Ferroday describes 60 brazed plates in 304 stainless steel with 99.9% copper brazed, made for cooling wort, beer and water.

Cooling speed and surface area

Cooling speed is stated only on the plate side: Ferroday states the plate chiller cools wort within minutes rather than several hours, compared with the immersion chiller, and credits 60 plates for increased cooling surface area.

Neither Vigorous coil states a cooling time, so the two sides cannot be compared on speed from these listings. The immersion side argues with coil length instead: 25 ft and 50 ft.

Cleaning and clogging

The immersion coils are described as easy to keep clean, and they lift out of the kettle. The plate chiller cannot be disassembled, so Ferroday states the routine: run 5 gallons of cleaning solution through it, then clear water, and dry before storage.

Ferroday states to install a filter for the wort to prevent clogging, and states the chiller cannot be used for viscous liquids.

Fittings, pumps and setup

The Ferroday example has standard 1/2 NPT and 3/4 NPT thread ports, stated as compatible with most home brewing equipment systems, and works with a water pump: wort-in to the mash tun and wort-out to the fermenter.

Neither Vigorous coil states a fitting or a thread size, so the immersion setup is the coil itself in the kettle.

Listing gaps to check

No listing here states a warranty term or a weight. The plate chiller states its size as 7.5 by 5.6 inches.

How to choose the best immersion chiller vs plate chiller

Match the chiller to the setup

A kettle with room for a coil suits an immersion chiller, and the Vigorous coils sit in the wort with no pump or ports needed. A pumped setup with a mash tun and a fermenter suits a plate chiller. Our homebrew kettle vs stock pot guide covers the kettle side.

Check the cleaning routine

The immersion coils are described as easy to keep clean, and they lift out of the kettle. The plate chiller cannot be disassembled, so cleaning means running 5 gallons of cleaning solution through it, then clear water.

Check the fittings and the size

The Ferroday example has 1/2 NPT and 3/4 NPT threads and measures 7.5 by 5.6 inches. The Vigorous coils state no fittings, so check coil length and tube size against the kettle. Compare kettles and kits in our best beer brewing kit guide.

In the Preserving Kitchen

  • Run 5 gallons of cleaning solution through the plate chiller, then clear water, and dry it before storage.
  • Install a filter on the wort to keep the plate chiller from clogging.

How the Harvest Score played out

Product Harvest Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Ferroday 60 Plate Wort Chiller 9.7 32 22 21 7 0
Vigorous 3/8 x 50 Ft Chiller 9.6 30 21 21 6 0
Vigorous 3/4 x 25 Ft Chiller 9.6 29 21 20 6 0

Point totals are rescaled to the 9.2 and 9.8 end points in a straight line, so two tools keep the same order they earned on points.

The Harvest Score weighs performance, build, value, safety and warranty. For chillers, safety covers the stated food-grade material and the clogging guidance: the 304 stainless steel and ASTM A269 on the Vigorous coils, and the plates and filter guidance on the Ferroday. No listing earns warranty points. How we pick explains the weights.

FAQ: preserving at home

Which cools faster, an immersion chiller or a plate chiller?

Only the Ferroday listing states a speed: the plate chiller cools wort within minutes rather than several hours, compared with the immersion chiller.

Can the plate chiller be taken apart for cleaning?

No. Ferroday states the wort cooler cannot be disassembled to clean.

What fittings does the plate chiller use?

Standard 1/2 NPT and 3/4 NPT thread ports, stated as compatible with most home brewing equipment systems.

Do any of these chillers state a warranty?

No. None of the 3 listings states a warranty term.

Ferroday 60 Plate Wort Chiller
Still deciding? Our top pickFerroday 60 Plate Wort Chiller
Check price on Amazon

More preserving guides

See every beer brewing guide and all home brewing guides.

More picks: beer brewing kits, all grain vs extract brewing, carboy vs fermenter bucket and grain mills for beer.

Read next in the kitchen