Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Japanese vs German Fillet Knife: Which One Should You Buy?
Game and Fish Processing

Japanese vs German Fillet Knife: Which One Should You Buy?

Japanese vs German fillet knife compared on four listings, with edge angles, steel hardness, handles and weight, and a clear pick for filleting fish at home.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1PAUDIN 7-Inch Fillet KnifePAUDIN 7-Inch Fillet Knife9.8/10View on Amazon
  2. 2Cutluxe 7-Inch Fillet KnifeCutluxe 7-Inch Fillet Knife9.7/10View on Amazon
  3. 3Atumuryou 6-Inch Boning KnifeAtumuryou 6-Inch Boning Knife9.6/10View on Amazon
  4. 4imarku 7-Inch Santoku Knifeimarku 7-Inch Santoku Knife9.5/10View on Amazon

A morning catch spread across the cleaning table is where a fillet knife earns its keep, and the japanese vs german fillet knife choice turns on how each side shapes its edge. Knives from both sides were compared using only what the makers state about blade length, edge angle, steel, handles and weight.

HarvestGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick verdict: choose the Japanese side for the narrowest stated edge, the Atumuryou at 12 degrees with a 62 HRC VG10 core. Choose the German side for a tougher stated steel with a lifetime warranty, the PAUDIN at 58+ HRC with a 15-degree edge and a G10 handle. The imarku is a Santoku chef knife, not a fillet knife, so it suits general kitchen slicing rather than filleting.

Four examples

PAUDIN 7-Inch Fillet Knife

PAUDIN 7-Inch Fillet Knife

PAUDIN9.8/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-inch fillet knife in 1.4116 German steel at 58+ HRC with a 15-degree edge, a G10 handle and a lifetime warranty.

Pros

  • 1.4116 German steel at 58+ HRC with a 15-degree hand-polished edge
  • 0.08-inch semi-flexible blade follows the contours of fish bones and rib cages
  • G10 fiberglass handle with a full tang and three rivets, stated as non-slip with wet or greasy hands
  • Dishwasher safe with a lifetime warranty against defects in materials and workmanship

Cons

  • Weighs 0.44 pounds, heavier than the 0.32 pound Atumuryou
  • Maker recommends hand washing to preserve the edge even though the knife is dishwasher safe
  • Only a 7-inch length is listed, with no longer option for large fish
  • At 12.32 inches long overall, it needs more storage space than the 11.9-inch Atumuryou
Cutluxe 7-Inch Fillet Knife

Cutluxe 7-Inch Fillet Knife

Cutluxe9.7/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-inch fillet knife in forged high-carbon German steel with a 14 to 16 degree edge, a full tang and a triple-riveted Pakkawood handle.

Pros

  • Forged high-carbon German steel at 56+ Rockwell hardness with a 14 to 16 degree edge
  • Full tang with a triple-riveted Pakkawood handle for stability and comfort
  • Tapered edge for skinning and trimming fish and meat
  • Lifetime warranty against material or workmanship defects

Cons

  • Weighs 0.93 pounds, the heaviest of the four knives
  • At 56+ Rockwell, its stated hardness is lower than the 58+ HRC of the PAUDIN and the 62 HRC of the Atumuryou
  • Only a 7-inch length is listed, with no longer option for large fish
  • No sheath is listed, so the knife needs separate storage
Atumuryou 6-Inch Boning Knife

Atumuryou 6-Inch Boning Knife

Atumuryou9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch Japanese boning knife with a VG10 core in 67-layer Damascus steel, a 12-degree edge and a resin wood handle, weighing 0.32 pounds.

Pros

  • VG10 steel core at 62 HRC inside 67 layers of Damascus steel
  • Hand-sharpened 12-degree edge, the narrowest angle stated here
  • 6-inch narrow blade with a curved profile for following fish contours
  • Weighs 0.32 pounds, the lowest weight of the four knives

Cons

  • No warranty term is stated
  • 6-inch blade is the smallest of the four knives
  • No dishwasher safe claim is stated
  • Each handle has a one-of-a-kind grain pattern, so the handle received will differ in looks
imarku 7-Inch Santoku Knife

imarku 7-Inch Santoku Knife

imarku9.5/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-inch Japanese Santoku chef knife in high carbon stainless steel with a 2.5 mm blade and a Pakkawood handle, edged at 15 to 18 degrees per side.

Pros

  • Japanese high carbon stainless steel that resists rust, corrosion and discoloration
  • Hand-polished edge at 15 to 18 degrees per side on a 2.5 mm blade
  • Hollow edge keeps food from sticking to the blade while slicing
  • Pakkawood handle stated to minimize wrist tension with a firm, comfortable grip

Cons

  • A Santoku chef knife, not a fillet knife, so it does not suit filleting
  • No hardness figure is stated, so its edge retention cannot be compared on steel
  • Weighs 0.43 pounds, heavier than the 0.32 pound Atumuryou
  • The 1-year free exchange is shorter than the lifetime warranties on the German knives

As an Amazon Associate I earn from qualifying purchases.


Runners-up to consider

Japanese vs German Fillet Knife: Side by Side

Fillet Knife Harvest Score Side Blade Length Edge Angle Hardness Weight Amazon
PAUDIN 7-Inch Fillet Knife 9.8/10 German 7 inches 15 degrees 58+ HRC 0.44 lb View on Amazon
Cutluxe 7-Inch Fillet Knife 9.7/10 German 7 inches 14 to 16 degrees per side 56+ Rockwell 0.93 lb View on Amazon
Atumuryou 6-Inch Boning Knife 9.6/10 Japanese 6 inches 12 degrees 62 HRC 0.32 lb View on Amazon
imarku 7-Inch Santoku Knife 9.5/10 Japanese 7 inches 15 to 18 degrees per side Not stated 0.43 lb View on Amazon

Numbers in this comparison come from the maker as the listing shows them, checked 19 November 2026.

What each knife is for

On the Japanese side, the Atumuryou is a 6-inch boning knife described for boning, trimming and filleting, with a narrow blade and curved profile for following the contours of fish. The imarku is a 7-inch Santoku chef knife for chopping, slicing, dicing and mincing meat, vegetables, fruit and bread, which puts it in the kitchen rather than on the cleaning table.

On the German side, both knives are 7-inch fillet knives. The Cutluxe is described for filleting, de-boning, trimming, skinning and butterflying fish and meat, while the PAUDIN covers fish filleting and skinning salmon plus deboning chicken and trimming beef brisket.

Edge angles and steel

Edge angle is the clearest split the makers state. The Atumuryou is hand-sharpened to a 12-degree edge, the narrowest angle stated across the knives. The PAUDIN lists a 15-degree hand-polished edge, the Cutluxe lists 14 to 16 degrees per side, and the imarku lists 15 to 18 degrees per side.

Steel hardness is stated for the Atumuryou, the PAUDIN and the Cutluxe. The Atumuryou lists a VG10 steel core at 62 HRC inside 67 layers of Damascus steel. The PAUDIN lists 1.4116 German steel at 58+ HRC, and the Cutluxe lists high-carbon German steel at 56+ Rockwell hardness. The imarku lists Japanese high carbon stainless steel with no hardness figure, so its hardness stays unclear.

Handles, weight and care

Handles differ across the four knives. The imarku and the Cutluxe use Pakkawood handles, the Atumuryou uses a resin wood handle, and the PAUDIN uses a G10 fiberglass handle. The Cutluxe and the PAUDIN state a full tang, with the Cutluxe triple-riveted and the PAUDIN reinforced by three rivets.

Weights run from 0.32 pounds for the Atumuryou to 0.93 pounds for the Cutluxe, with the imarku at 0.43 pounds and the PAUDIN at 0.44 pounds. The PAUDIN is stated as dishwasher safe, though the maker recommends hand washing and towel drying to preserve the 15-degree edge. The imarku, Atumuryou and PAUDIN come in gift boxes.

Gaps to check before ordering

The imarku is the gap to notice first: it is a Santoku chef knife, not a fillet knife, so it does not belong in a fillet comparison on shape alone. The Atumuryou states no warranty term, while the Cutluxe and the PAUDIN state a lifetime warranty and the imarku states a 1-year free exchange service with a 3-month free refund. The PAUDIN states dishwasher safe in one place and recommends hand washing in another, so treat hand washing as the maker’s real advice.

Which should you choose?

Choose the Japanese side if you want the narrowest stated edge and the hardest stated steel, and you are happy with a 6-inch boning knife for filleting. The Atumuryou pairs a 12-degree edge with a 62 HRC VG10 core. Compare more options in the best Japanese fish fillet knife guide.

Choose the German side if you want a 7-inch fillet knife with a lifetime warranty and a tougher handle, and you fillet fish and trim meat with the same knife. The PAUDIN pairs a 15-degree edge with 58+ HRC steel and a G10 handle. See the best fish fillet knife guide for more fillet knives.

In the Preserving Kitchen

  • Hand wash the PAUDIN and towel dry it right away to preserve the 15-degree edge, as the maker recommends.
  • Keep the imarku, Atumuryou and PAUDIN in their gift boxes between uses so the edges stay protected.
  • Dry the blades before putting them away; the makers state rust resistance for the steels named.
  • Check the edge angle in the maker’s notes before sharpening; the knives list 12 degrees, 14 to 16 degrees, 15 degrees and 15 to 18 degrees per side.

How the Harvest Score played out

Product Harvest Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
PAUDIN 7-Inch Fillet Knife 9.8 32 22 21 8 4
Cutluxe 7-Inch Fillet Knife 9.7 30 22 20 7 4
Atumuryou 6-Inch Boning Knife 9.6 32 22 21 5 0
imarku 7-Inch Santoku Knife 9.5 27 20 20 5 2

Harvest Scores sit on a narrow band from 9.2 up to 9.8. Each tool’s weighted points are converted onto it proportionally, and a higher total always gives a higher number.

The Harvest Score weighs performance, build, value, safety and warranty. For fillet knives, safety covers the stated grip and handle features that keep the knife under control: the G10 handle and full tang on the PAUDIN, the triple-riveted Pakkawood handle and full tang on the Cutluxe, and the ergonomic handles on the Atumuryou and the imarku. The PAUDIN scores highest for its stated hardness, edge, G10 handle and lifetime warranty, while the Atumuryou earns no warranty points because no term is stated. The imarku earns warranty points for its 1-year free exchange service. How we pick explains the weights.

FAQ: preserving at home

Which side has the sharper stated edge?

The Japanese side, on the Atumuryou at 12 degrees. The German side lists 14 to 16 degrees per side on the Cutluxe and 15 degrees on the PAUDIN.

Can a Santoku knife fillet fish?

The imarku Santoku is a 7-inch chef knife for chopping, slicing, dicing and mincing, not a fillet knife. Use the Atumuryou for filleting on the Japanese side, or either German knife.

Do any of these knives state a lifetime warranty?

Yes. The Cutluxe and the PAUDIN state a lifetime warranty against defects in materials and workmanship. The imarku states a 1-year free exchange service, and the Atumuryou states no warranty term.

Which knife weighs the least of the four?

The Atumuryou at 0.32 pounds. The imarku weighs 0.43 pounds, the PAUDIN weighs 0.44 pounds, and the Cutluxe weighs 0.93 pounds.

Is the PAUDIN dishwasher safe?

The maker states that it is dishwasher safe, and also recommends hand washing with towel drying to preserve the 15-degree edge.

PAUDIN 7-Inch Fillet Knife
Still deciding? Our top pickPAUDIN 7-Inch Fillet Knife
Check price on Amazon

More preserving guides

See every fish processing guide, every meat processing guide and all game and fish processing guides.

More picks: fillet knives for freshwater fish, fillet knives for panfish, fillet knives for saltwater fish and small fillet knives.

Read next in the kitchen