Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Manual Sausage Linker: How to Use One
Harvest and Processing

Manual Sausage Linker: How to Use One

A manual sausage linker ties a filled casing into even links with thread and a hand crank: how to feed it, set the length, tie off and keep it clean.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1CHEF KEY Manual Sausage Stuffer 11LBS/5LCHEF KEY Manual Sausage Stuffer 11LBS/5L9.6/10View on Amazon
  2. 2EKway 11Lb/5L Sausage StufferEKway 11Lb/5L Sausage Stuffer9.6/10View on Amazon
  3. 3LEM Products 5 lb Sausage StufferLEM Products 5 lb Sausage Stuffer9.5/10View on Amazon

A manual sausage linker is a hand-cranked machine that ties a filled sausage casing into even links with thread. It handles the tying stage only: the casings must already be filled, and it does not fill, cut, or automatically feed casings on its own. This guide explains the manual linker step by step, from a filled casing to a row of even links, and shows where the nearby tools fit.

HarvestGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Manual sausage linker: what it does

A manual linker ties off individual casings with string. The LEM linker (on Amazon), for example, accepts sausages up to 42mm in diameter, works with natural or collagen casings, and ties links from 1 inch to 7 inches long. The ZIROXI and Generic hand-rolling machines handle sausages with a diameter of less than 45mm, with adjustable tightness and length. A precision gear and an ergonomic handle keep the rolling smooth, and the tabletop design stays stable while you work.

Tool What it does When to use it
Manual tying machine Rolls a filled casing and ties thread around it Linking fresh sausages at home or in a butcher shop
LEM manual linker Feeds rope sausage and ties links from 1 to 7 inches long Even links from a filled casing
U-shape clipper Clips casings shut with metal buckles Sealing sausage ends for packing
Sausage pricker Pricks casings with 3 sharp prongs to release air Before cooking, to stop casings bursting
Stuffer funnel Fills casings with ground meat through 3 tube sizes Filling, before linking

Start with a filled casing

Linking comes after filling. The stuffer funnel fills casings with ground meat, and the Awxevcik stuffer (on Amazon) lists 3 tube sizes: 1.2 cm, 1.5 cm and 2 cm in diameter. The Flyseago electric linker (on Amazon) is built for pre-filled casings, and the SYSXLT listing states plainly that its machine wraps thread to separate portions and does not fill, cut, or automatically feed casings. Feed a filled casing into the linker only when the filling is done.

Feed the rope and set the length

Feed the rope sausage into the linker, pull it to the length you want, and set the stop. The LEM linker pulls links from 1 inch to 7 inches long. The SYSXLT machine (on Amazon) uses a graduated rail and an adjustable stopper for portions up to 18cm, and the Flyseago linker uses a graduated guide rail with scale markings to position filled casings and control portion length. Move the guide to the length you need, then keep it there for the batch so the links come out even.

Crank the handle to tie

With the casing in place, hand crank the handle and let the machine wind the thread around the casing. The ZIROXI machine (on Amazon) uses a precision gear, rolls smoothly and saves strength, and ties at 50 knots per minute. The Generic machine lists the same speed, up to 50 knots per minute, with a precision gear-driven system and an ergonomic handle. The YILIKISS machine lists an average speed of at least 50 knots per minute with adjustable tightness. Forward and reverse rotation, on the Flyseago and SYSXLT machines, lets you rewind and adjust the thread between links.

Match the diameter to the machine

Check the sausage diameter before you buy or use a linker. The ZIROXI and Generic machines handle diameters of less than 45mm. The LEM linker accepts up to 42mm, and the Flyseago electric linker is built for sausages up to 42mm in diameter. The SYSXLT machine lists a 43mm working opening. One listing needs a closer look: the YILIKISS machine titles itself 0-42mm while its bullets allow a diameter of less than 45mm, so check the listing before using it for a casing near the top of that range.

Prick air pockets before tying

Air trapped in a casing can make a link burst while it cooks, so prick the casing before tying. The BOLEXINO pricker is 6.5 inches long with 3 stainless steel prongs, and the ziHenryDa set lists 4 pricker tools with 3 sharp tines each. The prongs pierce the casing and release air, and the listings state that pricking keeps the casing from bursting. Keep the pricker in its storage case when not in use: the BOLEXINO set includes one, and the case keeps the prongs sharp and free from damage.

Manual or electric: which one is it

Not every listing titled as a manual linker is one. The SYSXLT listing titles itself a manual sausage linker machine while describing an 80W copper motor and electric tying, so read the bullets before buying. The Flyseago machine is listed as electric from the start, with forward and reverse rotation and a graduated guide rail. A manual linker runs on a hand crank and a precision gear. If the listing mentions watts or a motor, it is not a manual machine however the title reads.

Listing details to double-check

Two more listings disagree with themselves. The VEVOR clipper title says it comes with 1 box of buckles at 5000pcs, while its bullets say it comes with two boxes of clips, Model U506, 5000pcs. The BOLEXINO pricker title says 6.5 inches, while its spec table part number says 5.5 inches. Trust the bullets over the spec table, and check the listing when the title and the bullets disagree.

Clean and store the machine

Most manual linkers in these listings are food-grade 304 stainless steel, which the listings call easy to clean and rust-proof. The SYSXLT guide is detachable and removes for cleaning. Wash the pricker with warm water and dish soap after use, then dry it with a clean towel to prevent rusting. Wipe the machine down after each batch and keep the thread spool dry: the LEM set includes a spool of thread with the linker.

What this guide does not cover

This manual sausage linker guide covers the tying stage only. It does not give sausage recipes, stuffing ratios or storage times. Take those from current USDA guidance for fresh sausage, and follow them exactly for each batch.

FAQ: preserving at home

Does a manual sausage linker stuff the casings?

No. It ties pre-filled casings into links with thread. The Flyseago listing states its machine handles the tying stage after filling and does not stuff sausage casings.

What diameter sausage can a manual linker handle?

It depends on the machine: the ZIROXI and Generic machines handle less than 45mm, the LEM linker accepts up to 42mm, and the SYSXLT lists a 43mm working opening.

How fast can a manual linker tie?

The ZIROXI, YILIKISS and Generic listings state 50 knots per minute, with adjustable tightness on the ZIROXI and YILIKISS machines.

Do you need a sausage pricker too?

A pricker helps: 3 sharp prongs pierce the casing and release air so links do not burst while cooking. The BOLEXINO pricker is 6.5 inches long and comes in a 2-pack with a storage case.

How long can the links be?

The LEM linker pulls links from 1 inch to 7 inches long, and the SYSXLT machine portions up to 18cm with a graduated rail and adjustable stopper.

More preserving guides

See every harvest processing guide.

More picks: sausage stuffers for beginners, sausage casings, meat grinders for sausage making and sausage making kits with casings.

Read next in the kitchen