Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Parts for Meat Grinder: Plates, Blades and Sizes
Harvest and Processing

Parts for Meat Grinder: Plates, Blades and Sizes

Parts for meat grinder, explained: blades and plates by size, square hole and diameter, with cleaning guidance from each listing.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VNIMTI Blades and PlatesVNIMTI Blades and Plates9.6/10View on Amazon
  2. 2Together-life 7 Piece PlatesTogether-life 7 Piece Plates9.6/10View on Amazon
  3. 3OZIO Size 5 Grinder BladeOZIO Size 5 Grinder Blade9.6/10View on Amazon
  4. 4VTurboWay #22 Grinder BladeVTurboWay #22 Grinder Blade9.5/10View on Amazon

The grinder is slowing down on a batch that needs to fill the freezer, and parts for meat grinder is the search that names what to replace: the blade and the plate. The short answer is to match the part to your grinder size, check the square hole and the plate diameter, and fit a fresh blade with a fresh plate so the cut stays clean.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

VNIMTI Blades and Plates

VNIMTI Blades and Plates

VNIMTI9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A food-grade stainless steel set with 2 sharp blades and 2 cutting plates, coarse at 8mm and fine at 5mm, for stand mixer grinders.

Pros

  • 2 blades and 2 plates in the set
  • Coarse 8mm and fine 5mm plates for thick and thin strips
  • Food-grade stainless steel, not easy to rust

Cons

  • Not dishwasher safe; hand wash and dry as soon as possible
  • A bullet line reads '4 feet & 2 feet' for the plates, which matches no stated size
  • No warranty term is stated
Together-life 7 Piece Plates

Together-life 7 Piece Plates

Together-life9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece set with 5 grinding plates and 2 cutting blades in 420 stainless steel, sized for 55 mm grinders.

Pros

  • 5 plates and 2 blades in the set
  • Fits 55 mm grinders, with a 7mm center hole
  • 420 stainless steel, anti-rust

Cons

  • Not dishwasher safe; hand wash only
  • Listing gives no hole sizes for the 5 plates
  • No warranty term is stated
OZIO Size 5 Grinder Blade

OZIO Size 5 Grinder Blade

OZIO9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of stainless steel size 5 grinder blades with a 5/16 inch square hole and a 48mm diagonal, made for KitchenAid stand mixers.

Pros

  • 2 blades in the pack
  • Dishwasher safe, or wash with liquid detergent
  • Square hole 5/16 inch with a 48mm diagonal

Cons

  • Fits size 5 grinders only; verify your current knife specs before ordering
  • Title text is clipped, reading 'Fits Kitchen' where the bullets name KitchenAid stand mixers
  • No warranty term is stated
VTurboWay #22 Grinder Blade

VTurboWay #22 Grinder Blade

VTurboWay9.5/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of SS420 stainless steel #22 grinder blades with a 13mm square hole and a 74mm diagonal, sold as an aftermarket part.

Pros

  • 2 blades in the pack
  • SS420 stainless steel
  • Square hole 13mm, fits a shaft up to 13.5mm

Cons

  • Non-original aftermarket part, not the maker original
  • Listing gives no dishwasher guidance
  • No warranty term is stated

As an Amazon Associate I earn from qualifying purchases.


Parts for meat grinder: the short list

Grinder parts fall into blades that cut and plates that set the grind. The table shows what each listing states, so you can match the part to your grinder before ordering.

Part Stated size Check before ordering Amazon
OZIO blade Size 5, square hole 5/16 in Match the square hole to your grinder
VTurboWay blade #22, square hole 13mm Match the square hole to your grinder
VNIMTI blades and plates 2.27 in diameter, coarse 8mm, fine 5mm Match the diameter to your grinder View on Amazon
Together-life plates and blades 55 mm grinders, center hole 7mm Match the center hole to your grinder

Start with the size, not the part

Grinder parts are sized, not universal. The OZIO blade fits size 5 grinders, the VTurboWay blade (on Amazon) fits #22 grinders, and the Together-life set fits 55 mm grinders. The VNIMTI set states a 2.27 inch diameter and no grinder size number, so measure your plate before ordering. The OZIO and VTurboWay listings say to verify your current knife specs before ordering, and that advice holds for plates as well: a plate that does not fit the grinder head will not cut, no matter how sharp the blade is.

Blades: the cutting edge

The blade turns on the shaft and shears meat against the plate. The OZIO blade (on Amazon) is a 2-pack of stainless steel blades with a 5/16 inch square hole, 8.0 mm, and a 48mm diagonal, made for KitchenAid stand mixers. The VTurboWay blade is a 2-pack of SS420 stainless steel blades with a 13mm square hole, a shaft fit up to 13.5mm, and a 74mm diagonal. The VTurboWay listing states it is a non-original aftermarket part, so check the fit against your current blade before ordering.

Plates: coarse, medium and fine

The plate sets the grind: coarse holes for thick strips, fine holes for thin strips. The VNIMTI set includes a coarse 8mm plate for thick meat strips and a fine 5mm plate for thin meat strips. The Together-life set includes 5 grinding plates and 2 cutting blades, with coarse, medium and fine plates: coarse for cooked meat, vegetables and cheeses, medium for meats, hard cheeses and dried breads, and fine for raw or slow-cooked meats and breadcrumbs. The Together-life listing gives no hole sizes for its plates, so the VNIMTI plate (on Amazon) sizes are the only plate hole figures in this guide.

The gear

The blade sets the cut, the plate sets the grind, and the size numbers decide the fit: size 5, #22, 55 mm, or a 2.27 inch diameter.

Cleaning and care

Care differs by listing. The OZIO blade can be washed in the dishwasher or with liquid dish washing detergent and towel dried. The VNIMTI set is not dishwasher safe: hand wash and dry the parts as soon as possible after use, and wipe the parts with vegetable oil to prolong their life. The Together-life set is not dishwasher safe either: hand wash only. The VTurboWay listing gives no dishwasher guidance, so check the listing before you wash it.

What this guide does not cover

This guide covers blades and plates only. It does not give recipes, times or pressures, and it does not cover the auger or the grinder body, which no listing here describes. For recipes and safe preserving guidance, use current USDA and National Center for Home Food Preservation guidance. For the grinder itself, see our best meat grinder for sausage making guide.

FAQ: preserving at home

What parts does a meat grinder have?

The listings in this guide cover blades and plates. A blade turns on the shaft and cuts against the plate, and the plate sets the grind. Match the blade size, the square hole and the plate diameter to your grinder.

How do I know which size blade fits my grinder?

Match the size number and the square hole: size 5 with a 5/16 inch square hole, #22 with a 13mm square hole, or 55 mm grinders with a 7mm center hole. Verify your current knife specs before ordering, as the OZIO and VTurboWay listings direct.

Can meat grinder blades and plates go in the dishwasher?

It depends on the listing. The OZIO blade is dishwasher safe, while the VNIMTI set and the Together-life set are not dishwasher safe and call for hand washing. The VTurboWay listing gives no dishwasher guidance.

What is the difference between coarse and fine grinding plates?

The VNIMTI coarse 8mm plate suits thick meat strips and the fine 5mm plate suits thin meat strips. The Together-life coarse plate suits cooked meat, vegetables and cheeses, the medium plate suits meats, hard cheeses and dried breads, and the fine plate suits raw or slow-cooked meats and breadcrumbs.

VNIMTI Blades and Plates
Still deciding? Our top pickVNIMTI Blades and Plates
Check price on Amazon

More preserving guides

See every Harvest and Processing guide and all food mills guides. Also see our cider and fruit presses guide and our grain mills guide.

More picks: cast iron meat grinders, fruit pickers and harvest knives.

Read next in the kitchen