Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Propane Regulator Parts for Outdoor Canning Burners
Canning

Propane Regulator Parts for Outdoor Canning Burners

Propane regulator parts explained: the regulator, hose and fittings between tank and burner, with the sizes, threads and ratings the makers state.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Flame King 2-Stage Auto Changeover LP Propane Gas RegulatorFlame King 2-Stage Auto Changeover LP Propane Gas Regulator9.7/10View on Amazon
  2. 2Mr. Heater 12 ft Propane Hose and Regulator AssemblyMr. Heater 12 ft Propane Hose and Regulator Assembly9.7/10View on Amazon
  3. 3PYXGLAQ RV Propane Regulator 2 Tank Hoses with GaugePYXGLAQ RV Propane Regulator 2 Tank Hoses with Gauge9.7/10View on Amazon

Propane regulator parts are the pieces between the tank and the burner: the regulator, the hose, and the fittings that join them. The regulator drops the high pressure in the tank down to the low pressure the burner needs, the hose carries the gas, and the fittings match the tank and the burner. This guide names each part, explains what it does, and shows how to match the parts to a burner, using the figures the makers state.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Propane regulator parts: the short list

A propane setup has a small set of parts. The table names each one and what it does.

Part What it does How to tell it apart
Regulator Drops tank pressure to burner pressure A low-pressure body with a tank fitting on one side and a hose fitting on the other
Hose Carries gas from the regulator to the burner Length and the fittings on each end
Tank fitting Joins the regulator to the tank QCC1, also called Type 1, on the tanks here
Burner fitting Joins the hose to the burner Flare nut, pipe thread or a brand fitting
Adapter Lets a part fit a different tank or burner Thread size and tank size range
Gauge Shows pressure on the hose A dial fitted to the hose

The regulator: what it does

The regulator is the part that sets the pressure. A propane tank holds gas at high pressure, and a burner needs it at low pressure, so the regulator sits between them and drops the pressure down. The Gas One listing calls its part a low pressure propane regulator for grills, fire pit tables and other propane appliances. The GasSaf griddle regulator states an air intake flow of 95000 BTU/hr and an outlet pressure of 11 in WC, and the maker says the temperature is controlled by turning the knob on the grill. For how a regulator works in more detail, see how does a propane regulator work.

BTU is the heat-output rating, and WC, short for water column, is the pressure unit the outlet rating uses. The figure belongs to the part that states it: the GasSaf griddle regulator states 95000 BTU/hr, and the Gas One regulator (on Amazon) is listed as maxing out at 80, 000 BTU. Match the rating to the burner the maker names, and do not borrow a rating from one part for another.

Hoses: lengths and layers

Hoses come in a few lengths, and the length is stated on the listing. The Gas One hose is 5 ft long, the two VIEAUBE hoses are 4 ft long, and the Yigiao hose (on Amazon) for Weber grills is 25 in long. A longer hose gives more room between the tank and the burner. Pick the length the listing states, and do not stretch a hose to reach.

The hose wall matters as much as the length. The Gas One hose is fiber reinforced, with PVC and brass connections. The VIEAUBE hose with a gauge has a 4-layer build of braided stainless steel, flame-retardant PVC and high-tensile cotton, while the VIEAUBE hose without a gauge has a 3-layer build of flame-retardant PVC and high-tensile cotton. Several listings say the part needs no tools to fit, and the Gas One hose is ready to use out of the box.

Fittings and threads: matching the ends

Every end of a hose or regulator has a fitting, and the fitting has to match the part it joins. The tank end on the listings here is most often a QCC1 fitting, also called Type 1: the Gas One hose is made for type-1 (QCC-1) propane tank connections, and the VIEAUBE hoses use a Type-1 (QCC-1) connection to a 3/8 in female flare nut. The Gas One hose has an inside 3/8 in flare fitting and an outside diameter of 5/8 in. The VIEAUBE fitting also states a nut thread of 5/8 in-18UNF and a swivel nut of 5/16 in.

Adapters change one fitting into another. The GasSaf adapter converts a Type 1 connection with a 1/4 in male pipe thread to QCC1/Type1, and it has excess flow protection with a safety plastic cap that pops off if damaged, stopping the flow of propane. The PalpitateC heater regulator (on Amazon) connects with a POL connector that goes directly to the propane tank, and the end swivel joint is hand tightened. Match the thread size the listing states to the thread on your tank and burner.

Tank sizes and burner matches

Regulators and hoses are sized for a tank range, and the range is stated on the listing. The GasSaf griddle regulator connects a 1 lb propane tank, and with an adapter hose it can connect 5 to 40 lb propane tanks. The VIEAUBE hoses connect to 5-40 lb QCC1 (Type1) propane tanks, and the GasSaf adapter connects a 20 lb to 30 lb propane tank to a regulator and hose assembly. Check the tank size the listing states before ordering.

The burner match is stated the same way. The GasSaf griddle regulator fits Blackstone 17 in and 22 in tabletop griddles, and the VIEAUBE 3/8 in female flare adapter is compatible with 28 in and 36 in Blackstone griddle accessories. The Yigiao hose and regulator kit fits select Weber Genesis, Spirit and Summit grills, with replacement models such as 7627, 7501 and 7502, and the listing says to check the model number before purchasing. The PalpitateC regulator fits Mr. Heater tank top heaters MH15T, MH30T and MH45T, whose outlet size is 1/4 in, and the MH540T outlet is smaller, so that model needs additional adapters. It also fits SunRite tank top heaters SRC15T and SRC30T, with a note to check the outlet thread size before ordering. For the burners themselves, see the best outdoor propane burner guide.

Checking for leaks and wear

A new connection should be checked for leaks before the burner is lit. The Yigiao listing describes leak detection with soapy water: brush soapy water over the joints and watch for bubbles, and inspect the tank gasket as well. This guide explains the parts, not the installation: if a connection needs work beyond a simple swap, have a qualified person do it.

Propane burners are outdoor-only, away from walls and overhangs, and never in a garage or tent. Brass connections and an airtight fit help keep a connection leak-free: the Gas One regulator provides an airtight connection with brass connections, and the PalpitateC regulator uses solid brass connectors for airtightness. The GasSaf adapter adds excess flow protection, with a safety plastic cap that pops off if damaged and stops the flow of propane. A hose that is cracked or stiff, or a fitting that no longer seals, needs replacing.

FAQ: preserving at home

What does a propane regulator do?

It drops the high pressure in the tank down to the low pressure the burner needs. The Gas One listing calls its part a low pressure propane regulator, and the GasSaf griddle regulator states an outlet pressure of 11 in WC.

What is a QCC1 fitting?

QCC1, also called Type 1, is the tank connection used on the listings here. The Gas One hose is made for type-1 (QCC-1) tank connections, and the VIEAUBE hoses use a Type-1 (QCC-1) connection.

What size hose do I need?

The listings here state 4 ft, 5 ft and 25 in hoses. Pick the length that reaches from the tank to the burner without stretching.

How do I check a propane connection for leaks?

Brush soapy water over the joints and watch for bubbles, and inspect the tank gasket. A connection that bubbles needs attention before use.

Will a regulator fit my grill?

Check the model number and the fittings before ordering. The Yigiao kit fits select Weber Genesis, Spirit and Summit grills, and the GasSaf regulator fits Blackstone 17 in and 22 in tabletop griddles.

More preserving guides

See every pressure canner guide and all canning guides.

More picks: how to clean a propane regulator, why a propane regulator freezes up, outdoor canning propane stoves and pressure canners for propane burners.

Read next in the kitchen

Canning ·

How to Clean a Propane Regulator

Turn off the gas, wipe the outside of the regulator, clear the vent of debris and check the hose and fittings, then check for leaks before…