Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
What Can I Use Instead of a Canning Rack: Substitutes That Work
Canning

What Can I Use Instead of a Canning Rack: Substitutes That Work

What can I use instead of a canning rack? A steamer basket, a cooling rack or a folded towel can stand in, and this guide sizes the racks that do the job properly.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LeapDen Canning Rack SetLeapDen Canning Rack Set9.7/10View on Amazon
  2. 2E-far 11.4-Inch Canning RackE-far 11.4-Inch Canning Rack9.6/10View on Amazon
  3. 3P&P CHEF 3-Pack Round RackP&P CHEF 3-Pack Round Rack9.6/10View on Amazon
  4. 4Meluvora 3-Piece Canner RackMeluvora 3-Piece Canner Rack9.5/10View on Amazon

A pantry shelf full of jars starts with a pot of boiling water and a way to keep the jars off the bottom, and the question of what can i use instead of a canning rack comes up the moment the rack is missing or the pot is the wrong size. The short answer: a steamer basket, a round cooling rack, a folded kitchen towel or a ring of spare jar bands can all hold jars up off the bottom, as long as water can move freely around each jar. A rack made for the job is still the steadier choice, and this guide covers the substitutes, then the racks that do the job.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

LeapDen Canning Rack Set

LeapDen Canning Rack Set

Generic9.7/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-inch stainless steel canning rack with silicone handles, sold as a 2-piece set with jar lifter tongs for lifting hot jars out of the pot.

Pros

  • 12-inch rack with silicone handles that rest on both sides of the canner for lifting
  • Includes jar lifter tongs with non-slip handles for moving hot jars
  • 1-year warranty is stated, with 30-day return and exchange

Cons

  • Fits pressure pots of 20 quarts and larger only, so it does not suit smaller pots
  • Listing gives two jar counts: 6 quart jars in the title and about 5 16 fl oz jars in the bullets
  • Rack measures 8.8 inches high with handles, so it needs room to store
E-far 11.4-Inch Canning Rack

E-far 11.4-Inch Canning Rack

E-far9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 11.42-inch stainless steel canning rack with foldable handles that holds 7 pint jars or 6 quart jars off the bottom of the pot.

Pros

  • Holds 7 pint jars or 6 quart jars per batch
  • Foldable handles lay flat for storage and protect hands when lifting
  • Reinforced wire frame keeps jars upright and lets water circulate

Cons

  • Fits pots of 12.4 inches diameter and larger only
  • No warranty term is stated
  • Sold as one rack, so stacking layers needs another rack
P&P CHEF 3-Pack Round Rack

P&P CHEF 3-Pack Round Rack

P&P CHEF9.6/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of round stainless steel racks, 7.5, 9 and 10.5 inches, oven and dishwasher safe.

Pros

  • 3-pack in 7.5, 9 and 10.5 inches
  • Pure stainless steel, food safe stated
  • Oven and dishwasher safe stated

Cons

  • No warranty term is stated
  • 13.7 ounces
  • 1-inch elevation only
Meluvora 3-Piece Canner Rack

Meluvora 3-Piece Canner Rack

Meluvora9.5/10 Harvest Score
i
The Harvest Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece stainless steel rack set with 2 racks and a base for stacking layers in tall pots and pressure canners, keeping jars off the bottom.

Pros

  • 3-piece set with 2 racks and a base for stacking layers in tall pots
  • 10.8-inch racks suit most standard pressure canners and stockpots
  • Doubles as a cooling rack, steaming tray or trivet

Cons

  • No warranty term is stated
  • No stated jar capacity per rack

As an Amazon Associate I earn from qualifying purchases.


Runners-up to consider

What can I use instead of a canning rack: the short list

Each substitute below does the same plain job as a rack: it lifts jars off the pot bottom and leaves gaps for boiling water to move. Pick the one that fits the pot flat and stays put under a full load.

Substitute What it does Watch out for Amazon
Steamer basket Lifts jars on a folding metal frame and lets water pass through Fits only pots wider than the basket when open
Round cooling rack Holds jars on a flat wire grid above the pot bottom Needs a pot wide enough for the rack to sit flat
Folded kitchen towel Pads the bottom so jars do not sit on bare metal Can shift under jars and soak through
Spare jar bands Rings laid flat raise jars a little and let water flow between them Gives the least lift of the group
Silicone trivet Raises jars on a heat-safe mat with gaps for water Needs to fit flat and stay put under a full load

What a substitute has to do

A canning rack does a plain job: it holds jars off the bottom of the pot so boiling water can move around them and heat reaches every side. A substitute works when it does the same thing, stays flat under a full load of jars, and leaves gaps for water to flow. Anything that tips, folds under weight, or blocks the flow leaves jars sitting in still water at the bottom.

Size matters more than material. A substitute that fits the pot with room to spare is steadier than a substitute that wedges tight, and a flat layer beats a tall stack that wobbles when jars go in and out. Match the substitute to the pot, then to the jars.

A rack sized by jar count

Jar count is the figure that decides whether a rack fits the batch. The E-far rack holds 7 pint jars or 6 quart jars in pots of 12.4 inches diameter and larger, while the LeapDen set holds 6 quart jars and fits pressure pots of 20 quarts and larger. The Meluvora set stacks 2 racks on a base for tall pots, and the P&P CHEF pack offers 7.5, 9 and 10.5 inch racks for different pot sizes.

Measure the pot across the inside before choosing. The E-far rack (on Amazon) measures 11.42 inches across, the LeapDen rack measures 12 inches across and 8.8 inches high with its handles, and the Meluvora racks (on Amazon) measure 10.8 inches across. A rack that fits with room to spare lifts out cleanly; a rack that wedges tight is hard to lift when the water is hot. For the pot itself, see the best canning pot for water bath canning guide.

Canning racks that do the job

When the substitutes above are not steady enough for a full load, these racks hold jars off the bottom and lift out with the batch.

What to skip or double-check

  • A folded towel that bunches up: it can shift under jars and leave them sitting on bare metal.
  • A rack that wedges tight in the pot: it is hard to lift out when the water is hot.
  • A substitute with no gaps for water: jars need water moving around them, not a solid floor.
  • Reused flat lids: buy new lids each season.
  • An electric pressure cooker for canning: do not use one unless the maker states it is made for pressure canning.

What this guide does not cover

This is a guide to substitutes and racks. It does not give recipes, processing times, pressures, headspace figures or altitude changes. Take those from current USDA and National Center for Home Food Preservation guidance, or from a current edition of a trusted canning guide, and follow them exactly for each food.

FAQ: preserving at home

Can I use a steamer basket instead of a canning rack?

Yes, if it sits flat in the pot, holds the jars steady, and leaves gaps for boiling water to move around each jar.

Can I use a cooling rack in a canner?

Yes, if the rack fits flat inside the pot and holds the jars off the bottom without tipping under a full load.

Can I use a towel instead of a canning rack?

A folded towel can pad the bottom of the pot, but it can shift under jars, so a rack or steamer basket is steadier for a full load.

How many jars does a canning rack hold?

The E-far rack holds 7 pint jars or 6 quart jars, and the LeapDen set holds 6 quart jars.

Do I need a rack for water bath canning?

Yes, jars need to sit off the bottom of the pot so boiling water can move around them, and a rack, steamer basket or cooling rack does that job.

LeapDen Canning Rack Set
Still deciding? Our top pickLeapDen Canning Rack Set
Check price on Amazon

More preserving guides

Compare racks in the canning rack and canning rack sizes guides, or read canning rack vs steamer basket before choosing a substitute.

More picks: silicone vs metal canning rack, canning rack with lift out, alternative canning techniques and how to start canning.

Read next in the kitchen