Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Jerky Slicer vs Knife: Which One Should You Buy?
Drying

Jerky Slicer vs Knife: Which One Should You Buy?

Jerky slicer vs knife: a direct answer on which cuts better strips, plus four slicer listings ranked for jerky prep.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1shop-ezy Jerky Slicer Kitshop-ezy Jerky Slicer Kit9.6/10View on Amazon
  2. 2Jerky Cutting Board and 10-Inch Slicer Knife Brand: TSMJerky Cutting Board and 10-Inch Slicer Knife Brand: TSMView on Amazon
  3. 3LEM Products BigBite Jerky Slicer and Tenderizer AttachmentLEM Products BigBite Jerky Slicer and Tenderizer AttachmentView on Amazon
  4. 4Meat slicer Stainless Steel Jerky Maker Cutting Board WithMeat slicer Stainless Steel Jerky Maker Cutting Board WithView on Amazon

Jerky slicer vs knife comes down to consistency. A knife works for a small batch if your cuts are even, but a slicer cuts every strip the same thickness, which is what dries evenly. The short answer: use a slicer if you make jerky more than a few times a year, and a knife only for the occasional small batch. A jerky slicer is the right tool when the batch is big enough that uneven strips would dry at different rates.

Runners-up to consider

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Jerky slicer vs knife: the short answer

A knife is free and already in the drawer, but it is slow and the strips come out uneven. A slicer costs money and counter space, but every strip comes out the same. The table shows how the two approaches compare for jerky prep.

Approach What it does Strip consistency Best for
Jerky slicer Cuts strips at a fixed thickness Even, batch after batch Regular jerky making
Knife Hand-cut strips Varies with the cut Occasional small batches

Why even strips matter

Jerky dries from the outside in, so a thick strip stays raw inside while a thin strip over-dries. The slicers here solve this with fixed thickness: the OSTBA adjusts from 0 to 15mm, the Newhai cuts at 10mm, and the Jonscook offers 2mm or 4mm blade sets. The LEM is a 2-in-1 jerky slicer and tenderizer attachment that fits a grinder, aimed squarely at jerky. A knife can do the same job on a small batch, but keeping every strip at 2 or 4mm by hand takes a steady hand and a lot of time. Our jerky slicer vs meat slicer comparison covers the two machine types.

When the knife is enough

For a single batch from one roast, a sharp knife and a partially frozen cut of meat will get you there. Slice against the grain for tender strips or with the grain for chewy ones, and keep the strips as even as you can. Where the knife falls short is volume: a big batch means hundreds of cuts, and fatigue makes the strips wander. If you find yourself making jerky every month, the knife is costing you more in time than a slicer costs in money.

The four listings, ranked

All four listings in this guide are slicers, ranked by our scores.

1. OSTBA Electric Meat Slicer. A 150W electric slicer with a 7.5 inch stainless steel blade, 0 to 15mm adjustable thickness, a child lock that requires pressing the safety lock and power button together, non-slip suction cup feet, and removable blade, carriage, slide-rod extension and food pusher for cleaning. It measures 14.17 by 9.65 by 10.24 inches, weighs 8.6 pounds, is dishwasher safe and carries a 2-year warranty. The 24/7 customer support line is stated too.

2. Newhai 850W Commercial Meat Cutter. An 850W vertical meat cutter that slices at up to 550 pounds per hour, with a 10mm thickness, food-grade stainless steel blade and gear, and a vertical design that lets meat fall into a receptacle. It measures 14 by 8.6 by 18.1 inches and runs on 110 volts. It is not suitable for meat with bones, frozen meat or hard vegetables. No warranty term is stated. This is the pick for high-volume batches.

3. Jonscook Manual Fresh Meat Slicer. A manual slicer with 17 blades that cuts a piece of fresh meat into 18 thin slices in one pass, with 2 sets of blades for 2 or 4mm slices. It is 13 inches long, has a suction cup base and an armrest design, and the blade sets, container and base detach for cleaning. It is dishwasher safe and suited to fresh boneless meat only, not bones, frozen meat or hard vegetables. No warranty term is stated.

4. LEM BigBite 2-in-1 Jerky Slicer. A jerky slicer and tenderizer attachment for a LEM grinder, made of aluminum with a stainless steel blade, measuring 18.5 by 9.13 by 15.59 inches and weighing 9.9 pounds. It is hand-wash only, and the warranty line reads only Manufacturer Warranty with no term. It ranks last here because it needs a grinder you already own and says the least about itself.

What to skip or double-check

  • Bones, frozen meat and hard vegetables: the Newhai and Jonscook listings both say these will jam or damage the machine. Keep to fresh boneless meat.
  • Warranty terms: only the OSTBA states a 2-year warranty. The LEM line reads only Manufacturer Warranty, which is no term at all.
  • Cleaning: check the care line. The OSTBA and Jonscook are dishwasher safe; the LEM is hand-wash only.
  • Attachments: the LEM is a grinder attachment, not a standalone slicer. If you do not own the grinder, it cannot work.

What this guide does not cover

This is a slicing guide. It does not give jerky recipes, marinade times, drying temperatures or food safety rules. Take those from current USDA guidance for jerky and follow them exactly. Every drying guide on the site is collected in our food drying section.

FAQ: preserving at home

Is a jerky slicer better than a knife?

For consistency, yes. A slicer cuts every strip at the same thickness, which dries evenly. A knife works for small batches but the strips vary, and the thick ones stay raw inside while the thin ones over-dry.

What thickness should jerky strips be?

The listings here cover 2mm to 15mm: the Jonscook offers 2 or 4mm, the Newhai cuts at 10mm, and the OSTBA adjusts from 0 to 15mm. Thinner strips dry faster and more evenly.

Can I use a meat slicer for jerky?

Yes, that is what the OSTBA and Newhai listings are: meat slicers suited to jerky. The LEM is a dedicated jerky slicer attachment. See our jerky slicer vs meat slicer comparison for the differences.

Which slicer is easiest to clean?

The OSTBA and Jonscook are dishwasher safe with removable blades and parts. The LEM is hand-wash only, and the Newhai blade removes in three steps for washing.

More preserving guides

See every food drying guide.

More picks: jerky racks, meat grinders for homemade jerky and jerky guns for ground beef.

Read next in the kitchen