Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Kraut Cutter vs Knife: Which One Should You Buy?
Harvest and Processing

Kraut Cutter vs Knife: Which One Should You Buy?

Kraut cutter vs knife, answered with four cabbage and mandoline slicers compared on cut width, blades, safety holders and care rules.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Commercial French Fry CutterVEVOR Commercial French Fry Cutter9.6/10View on Amazon
  2. 2Fiskars Hori Hori Garden Knife with SheathFiskars Hori Hori Garden Knife with Sheath9.8/10View on Amazon
  3. 3Joie Crinkle Cutter KnifeJoie Crinkle Cutter Knife9.3/10View on Amazon
  4. 4jawbush Professional Lettuce Knifejawbush Professional Lettuce KnifeView on Amazon
  5. 5Cabbage Shredder for Coleslaw Sauerkraut cabbage slicerCabbage Shredder for Coleslaw Sauerkraut cabbage slicerView on Amazon

Kraut cutter vs knife: for shredding cabbage for kraut, the cutter wins. A cabbage slicer cuts uniform thin shreds with steady, repeatable strokes, while a knife depends on your skill and stamina to keep every shred the same width. If you make kraut once in a while in small batches, a sharp knife will do. If you shred heads of cabbage at a time, a slicer saves your hands and your evening. This guide compares the two approaches and lines up four slicer listings, ranked by what each states.

Runners-up to consider

HarvestGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Kraut cutter vs knife: the short answer

Even shreds ferment more evenly than a mix of thick and thin pieces, and evenness is where a fixed-blade slicer has the edge. Every one of the four listings here holds its blade at a set angle or thickness, so each pass produces the same cut. A knife can match that only with a sharp edge and practiced technique, and even then a whole head of cabbage is a long session.

The trade-off is flexibility. A knife you already own costs nothing extra, and it handles every other cutting job in the kitchen. A slicer is a single-purpose tool that needs counter space and careful washing. Choose based on how much cabbage you shred at once, not on which tool sounds more serious.

What a kraut cutter does

The listings call these mandoline slicers, cabbage slicers or shredders, but the job is the same: a fixed blade and a body you push the cabbage across. The Suncraft BS-271 cuts at about 0.04 inch (1 mm), a thin shred suited to kraut, across a wide 5.5 inch (14 cm) blade. The Arnest A-77107 uses 3 blades for a julienne shred. The Gramercy mandoline dials between 12 slice settings from paper-thin to thick-cut with a 4CR15 stainless steel blade. The ONCE FOR ALL JS03 adjusts from 0.1 to 8 mm and offers julienne, matchstick, slicing and dicing modes.

Width matters for cabbage. The Suncraft at 5.5 inches wide takes half-ball sizes, so you make fewer passes per head than on a narrower slicer. The Gramercy frame measures 16.54 by 6.69 by 3.15 inches with a 4.5 inch blade, and the ONCE FOR ALL measures 11 by 4.7 by 14 inches. Wider and longer bodies are steadier for big heads; compact ones store more easily.

When a knife is enough

If you shred one small head for a single jar, a knife is perfectly reasonable. Quarter the head, cut out the core, and slice thin against the board with a sharp chef’s knife. The shreds will be less uniform than a slicer’s, but in a small batch that matters less.

Keep the knife sharp. A dull blade crushes cabbage instead of cutting it, and crushed shreds weep more liquid and go soft faster. None of the four slicer listings is a knife, so compare them against the knife you already have on hand, not against an imaginary perfect blade.

The gear: four slicers, ranked

Ranked by fit for cabbage shredding, using what each listing states:

Slicer Cut Safety Care
Suncraft BS-271 cabbage slicer 0.04 in (1 mm), 5.5 in wide Holder included Hand wash only
Arnest A-77107 shred slicer Julienne shred, 3 blades Safety holder included Hand wash only
Gramercy mandoline 12 settings, 4.5 in blade Gloves, guard, non-slip base Dishwasher safe
ONCE FOR ALL JS03 0.1-8 mm, 4 modes Hidden blade, no gloves needed Dishwasher safe

1. Suncraft BS-271: the only listing built specifically around cabbage, with a 0.04 inch (1 mm) cut and a wide 5.5 inch blade that takes half-ball sizes. It includes a safety holder, the body is ABS resin with a heat-resistant temperature up to 142 degrees F (60 degrees C), and it is made in Japan. Note the listing disagrees with itself on size: the bullets read 15.0 by 5.5 by 0.7 inches and 12.8 oz (350 g), while the spec table reads 15.6 by 5.9 by 2 inches and 0.35 kg. Care is hand wash only.

2. Arnest A-77107: a julienne shred slicer, also made in Japan, using 3 blades for household slicers. It measures 3.9 by 12.6 by 1.2 inches and weighs about 4.9 oz (140 g), with a safety holder at 4.1 by 5.9 by 1.2 inches included. Hand wash only, and the listing says not for dishwasher or dryer. The narrow body suits smaller heads and quick batches.

3. Gramercy mandoline: the most adjustable pick, with 12 slice settings, a rotating blade cylinder and a 4CR15 stainless steel blade in a stainless steel frame. It includes cut-resistant gloves, a removable blade guard, a cleaning brush and a veggie holder, and the non-slip base keeps it steady. It measures 16.54 by 6.69 by 3.15 inches at 1.9 pounds and is top-rack dishwasher safe. No warranty term is stated.

4. ONCE FOR ALL JS03: a 0.1 to 8 mm adjustable slicer with julienne, matchstick, slicing and dicing modes, 420 stainless steel blades and a collapsible design for storage. It measures 11 by 4.7 by 14 inches at 2 pounds and is dishwasher safe. The listing states a 24 month warranty, the only one stated among the four, and says no gloves are needed thanks to the hidden blade design.

What to skip or double-check

  • Slicers without a holder or guard: the Suncraft and Arnest include holders; the Gramercy adds gloves and a guard. Never run fingertips to the end of the blade.
  • Dishwasher claims vs care labels: the Suncraft and Arnest list hand wash only, while the Gramercy and ONCE FOR ALL state dishwasher safe. Follow the care label, not the hope.
  • Spec table size mismatches: the Suncraft bullets and spec table give different dimensions, so treat the exact footprint as approximate until you measure your own.
  • One tool for every job: a cabbage slicer will not replace a knife for the coring, quartering and trimming you do before shredding.

What this guide does not cover

This is a cutting-method guide. It does not give recipes, salt ratios, fermenting times or storage guidance. For what happens after the shredding, see our fermenting vs pickling guide, compare glass vs plastic fermentation weights for keeping shreds submerged, and check pint vs quart fermentation jars for sizing your vessels. Every processing guide on the site is collected in our harvest and processing section.

FAQ: preserving at home

Is a kraut cutter better than a knife for kraut?

For even shreds, yes. A fixed-blade slicer repeats the same cut every pass, while a knife needs steady technique across a whole head of cabbage.

What thickness should cabbage be shredded for kraut?

The listings give examples: the Suncraft cuts at about 0.04 inch (1 mm), and the ONCE FOR ALL adjusts from 0.1 to 8 mm. Thin, even shreds are the goal these listings are built around.

Which slicer here is made for cabbage specifically?

The Suncraft BS-271, with a wide 5.5 inch blade sized for half-ball heads and a 1 mm cut. The others are general mandoline or shred slicers.

Are these slicers dishwasher safe?

The Gramercy and ONCE FOR ALL listings state dishwasher safe. The Suncraft and Arnest listings state hand wash only, and the Arnest adds not for dryer.

Do any of these state a warranty?

Only the ONCE FOR ALL, which states a 24 month warranty. The other three listings state no warranty term.

More preserving guides

See every kraut pounders guide and all harvest and processing guides.

More picks: kraut cutters for homesteaders, fermenting vs pickling, glass vs plastic fermentation weights and pint vs quart fermentation jars.

Read next in the kitchen