Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Meat Grinder Plate Sizes Explained
Harvest and Processing

Meat Grinder Plate Sizes Explained

Meat grinder plate sizes explained: how the grinder number, plate diameter and hole size fit together, and which sizes suit sausage, burgers and chili.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MEAT! 1.5 HP Pro-Grade Meat Grinder #32 with Coarse and FineMEAT! 1.5 HP Pro-Grade Meat Grinder #32 with Coarse and Fine9.7/10View on Amazon
  2. 2LEM Products BigBite #12 Meat GrinderLEM Products BigBite #12 Meat Grinder9.6/10View on Amazon
  3. 3Oaomi 3200W Max Electric Meat Grinder with Sausage TubesOaomi 3200W Max Electric Meat Grinder with Sausage Tubes9.6/10View on Amazon

Meat grinder plate sizes tell you which plate fits your grinder and how coarse or fine the meat comes out. The grinder size number, the plate diameter and the hole size work together: the size number must match your grinder, the diameter must match the grinder body, and the hole size sets the grind. This guide walks through each measurement in the order you should check it, using only the sizes the listings state.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Meat grinder plate sizes: the short list

The table below lines up the sizes the reference listings state for the common grinder sizes, so you can compare them at a glance.

Grinder size Plate diameter Hole sizes listed Suits
#5 55 mm 3 mm, 5 mm, 7 mm Fine, medium and coarse grinds; the 8-piece set adds 3 blades
#8 2 3/8 in 1/4 in (6.3 mm) Regular chili, ground meat, beef, or a mix of meats
#12 2.75 in (69 mm) 4.5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 18 mm Sausages and a 2nd grind; coarse plates for burgers

Start with the grinder size number

Grinder plates are sold by the grinder size they fit: #5, #8 and #12 are the sizes the reference listings cover. A plate made for one size does not fit another, so read the size number on your grinder or on the plate you already own before you order. Our #5 vs #8 meat grinder comparison and the #5 vs #12 meat grinder comparison explain how the grinder sizes differ.

The SBDSBD 8-piece (on Amazon) set fits size 5 grinders with a 55 mm diameter, and it includes 5 plates and 3 blades in 420 stainless steel. The QIXIAMO plate (on Amazon) suits grinders with a caliber of less than 55 mm. If your grinder is a #8, the National Band Saw plate is made for most #8 grinders, and it is not made for butcher boy grinders. Check the size number on the listing first.

Plate diameter and the center hole

The plate diameter is the width across the disc, and it has to match the grinder body. The #8 plate from National Band Saw measures 2 3/8 in across, with a center mount hole of 5/16 in (8 mm). The #12 listings state a plate diameter of 2.75 in (69 mm), and one #12 listing states a diameter of 70 mm. Measure your old plate across its widest point and compare it with the diameter the listing states.

The center hole matters too. The #8 plate has a 5/16 in (8 mm) center mount hole, while the #12 plates state a center hole of 2/5 in (10 mm). Check this figure along with the diameter. The BOLEXINO #12 plate also states a plate thickness of 8 mm, and one #12 listing states a thickness of 8.13 mm.

Hole size sets the grind

The holes in the plate decide how coarse or fine the meat comes out. Small holes give a fine grind for spreads and sausage filling, while large holes give a coarse grind for chili meat and burgers. The SBDSBD set for size 5 grinders covers 3 mm, 5 mm and 7 mm plates, plus specialty plates, so one set covers fine, medium and coarse grinds.

The #8 plate has 1/4 in (6.3 mm) holes, which the listing calls ideal for regular chili, ground meat, beef, or a mix of meats. For #12 grinders the listings cover a wider spread: 4.5 mm, 6 mm, 8 mm, 10 mm, 12 mm and 18 mm hole plates, plus a plate with 3 large holes. The BOLEXINO #12 plate has 4.5 mm holes, a fine-medium grind that the listing calls good for the 2nd grind and ideal for breakfast sausage, Polish sausage, Italian sausage and most regular sausages.

When you want a finer result, run the meat through a smaller hole size for the 2nd grind. The BOLEXINO listing describes its 4.5 mm plate as good for the 2nd grind, which is the usual way to refine a coarse pass. Match the hole size to the dish: fine holes for sausage filling and spreads, medium holes for meatballs and regular ground meat, coarse holes for chili and burgers.

Steel plates, care and cleaning

Most of the reference plates are stainless steel. The SBDSBD set is 420 stainless steel, and the QIXIAMO plate is 3CR13 stainless steel. The National Band Saw #8 plate is stainless steel, and the BOLEXINO #12 plate is stainless steel that the listing describes as resistant to rust, corrosion and wear.

Some plates are reversible. The National Band Saw #8 plate is reversible, and the BOLEXINO and FLZHBFC #12 plates are hubless plates that can be used on both sides, so you can flip a plate when one side wears. Pair the same knife and plate, because the National Band Saw listing warns that mismatching worn and new items leads to poor results and breakage.

For cleaning, the BOLEXINO listing says to clean the plate in warm, soapy water and to apply a small amount of vegetable oil to the plate to avoid rust. The SBDSBD set recommends hand washing to preserve sharpness, while the OUSTUE #12 listing states its plate is dishwasher safe. Read the care line on the listing you buy, because the advice differs from plate to plate. Our how to clean a meat grinder guide covers the full cleaning routine.

What to check before you buy

  • Grinder size number: match the plate to your grinder, #5, #8 or #12.
  • Plate diameter: measure the old plate; #8 plates measure 2 3/8 in, #12 plates measure 2.75 in (69 mm) or 70 mm.
  • Center hole: 5/16 in (8 mm) on the #8 plate, 2/5 in (10 mm) on the #12 plates.
  • Hole size: pick the grind you want, from 3 mm fine plates to 18 mm coarse plates.
  • Flat count: the National Band Saw listing notes 1 flat and 2 flat plates, and a 2 flat plate will replace a 1 flat plate, but a 1 flat plate will not replace a 2 flat plate.
  • Knife and plate: pair the same knife and plate, and replace them together when they wear.

Our parts for meat grinder guide covers plates, blades and sizes together, and the best food and meat grinder comparison lines up full grinders if you are buying a grinder as well as plates.

FAQ: preserving at home

What size meat grinder plate do I need?

Match the plate to your grinder size number, #5, #8 or #12, then check the plate diameter and the center hole against your old plate. The #8 plate measures 2 3/8 in across with a 5/16 in (8 mm) center hole, while #12 plates measure 2.75 in (69 mm) with a 2/5 in (10 mm) center hole.

What hole size is good for sausage?

The BOLEXINO #12 plate with 4.5 mm holes is a fine-medium grind that the listing calls good for the 2nd grind and ideal for breakfast sausage, Polish sausage, Italian sausage and most regular sausages. For a coarser sausage, move up to a 6 mm or 8 mm hole plate.

Can I use a #12 plate in a #8 grinder?

No. Plates are sized to the grinder, and a #12 plate at 2.75 in (69 mm) is wider than a #8 plate at 2 3/8 in. Buy the plate that matches your grinder size number and measure the diameter before you order.

Are meat grinder plates reversible?

Some are. The National Band Saw #8 plate is reversible, and hubless #12 plates can be used on both sides. Check the listing, because not every plate states that it can be flipped.

How do I keep a steel grinder plate from rusting?

Clean the plate in warm, soapy water, dry it well, and apply a small amount of vegetable oil, as the BOLEXINO listing suggests. Hand washing helps preserve sharpness, and a plate that the listing states is dishwasher safe can go in the dishwasher.

More preserving guides

See every harvest and processing guide.

More picks: parts for meat grinder, #5 vs #12 meat grinder, #5 vs #8 meat grinder and how to clean a meat grinder.

Read next in the kitchen