Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Plastic vs Stainless Steel Keg: Which One Should You Buy?
Home Brewing and Wine

Plastic vs Stainless Steel Keg: Which One Should You Buy?

Plastic vs stainless steel keg: the listings here hold one stainless steel keg and 3 pieces of keg hardware, with no plastic keg among them.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Pressure Fermenter 15 PSIVEVOR Pressure Fermenter 15 PSI9.6/10View on Amazon
  2. 2VEVOR 16 Gal Stainless Steel Fermentation Tank with Lid andVEVOR 16 Gal Stainless Steel Fermentation Tank with Lid and9.6/10View on Amazon
  3. 3FastRack 1 Gallon PET Wide Mouth Fermonster Carboy withFastRack 1 Gallon PET Wide Mouth Fermonster Carboy with9.5/10View on Amazon
  4. 45 Gallon Keg Corny Keg5 Gallon Keg Corny KegView on Amazon
  5. 52.5 Gallon Ball Lock Keg Cornelius Keg2.5 Gallon Ball Lock Keg Cornelius KegView on Amazon
  6. 6TMCRAFT 64oz Mini Keg GrowlerTMCRAFT 64oz Mini Keg GrowlerView on Amazon
  7. 7TMCRAFT 128OZ Stainless Steel Mini Keg with Exhaust Valve CapTMCRAFT 128OZ Stainless Steel Mini Keg with Exhaust Valve CapView on Amazon
  8. 81/6 Barrel Sankey D Connection Commercial Keg Stainless Steel1/6 Barrel Sankey D Connection Commercial Keg Stainless SteelView on Amazon
  9. 9Torpedo Keg Beer FaucetTorpedo Keg Beer FaucetView on Amazon

Plastic vs stainless steel keg is the question, and the listings here answer only half of it: no plastic keg is listed, and the one keg is the TMCRAFT 5 gallon stainless steel ball lock keg. The other 3 listings are keg hardware, a party pump, a stout faucet and a set of ball lock posts, all in stainless steel or with stainless steel parts. This guide compares both materials on what the listings actually state, and shows where each piece of hardware fits.

Runners-up to consider

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Plastic vs stainless steel keg: the short answer

The stainless side is the only side the listings cover. The TMCRAFT keg is a 5 gallon stainless steel ball lock keg, NSF-approved, that withstands pressure up to 130psi, with a pull ring pressure release valve on the lid. No plastic keg is listed, so the listings give no plastic keg to compare it with. What they do show is where each material is used: stainless steel for the parts that touch beer, and plastic for a hose and a tap handle.

Item Material Size What it does
TMCRAFT 5 Gallon Keg Stainless steel 5 gallon Holds and serves beer under pressure
WELLBOM Keg Party Pump Stainless steel probe, PVC hose 8 inch Pours beer from a Sankey D-system keg without CO2 tanks
MRbrew Stout Faucet 304 stainless steel, plastic handle 1-1/8 inch thread Pours nitro beer and cold brew coffee with a creamy head
Dbgogo Ball Lock Posts Stainless steel 19/32 inch-18 thread Replaces gas and liquid posts on corny kegs

The stainless steel keg

The TMCRAFT keg is the only keg in the listings: a 5 gallon stainless steel ball lock keg, 8.5 inches by 8.5 inches by 24 inches, with dual rubber handles, a black rubber base and a pull ring pressure release valve on the lid. The maker states it is NSF-approved, designed to food-safe NSF and ISO 9001 standards, and able to withstand pressure up to 130psi. The ball lock posts connect to a pressurized system and a kegerator, and the kegs stack once the disconnects are attached. The listing states a one year warranty.

Where the plastic goes

Plastic shows up in the listings only in small parts. The WELLBOM pump has a black beer hose made of food-grade PVC, and the MRbrew faucet has a standard black plastic tap handle, while the beer-contact parts on both are 304 stainless steel: the pump probe and the faucet body. The Dbgogo posts are stainless steel throughout, with silicone and rubber gaskets. In these listings, stainless steel carries the beer and the pressure, and plastic carries the grip and the hose.

The hardware that goes with a keg

The WELLBOM party pump fits U.S. Sankey D-system kegs and pours without CO2 tanks or regulators: lift the coupler handle, align the lugs, push down, and pump 3 to 4 times after the first pour. The maker says to let the keg rest for 1 to 2 hours after moving it, and to pump slowly and smoothly. The MRbrew faucet fits most US beer kegs, towers, stems and tap systems on a standard 1-1/8 inch thread, with a restrictor disc for nitro pours that comes out for CO2 systems. The Dbgogo set holds 2 gas posts and 2 liquid posts for corny and Cornelius kegs, with 4 posts and 4 poppet gaskets in the box.

What to check before you buy

  • Keg or hardware: check whether the listing sells a keg or a part for one. Only the TMCRAFT listing here is a keg.
  • Material at the beer: the listings put 304 stainless steel where beer flows, and plastic on handles and hoses.
  • Pressure: the TMCRAFT keg withstands pressure up to 130psi and has a pressure release valve on the lid.
  • Fit: the WELLBOM pump fits U.S. Sankey D-system kegs, and the Dbgogo posts fit corny and Cornelius kegs with 19/32 inch-18 threads.
  • Warranty: only the TMCRAFT listing states a warranty, one year.

FAQ: preserving at home

Is a stainless steel keg better than a plastic keg?

The listings here give no plastic keg to compare, so the answer comes from the stainless side only: the TMCRAFT keg is NSF-approved stainless steel that withstands pressure up to 130psi. A plastic keg would need its own listing to compare fairly.

What is a ball lock keg?

A keg with ball lock posts for gas in and liquid out, such as the TMCRAFT 5 gallon keg and the Dbgogo replacement posts. The gas post is notched and the liquid post is smooth, so each goes on its own side.

Do I need CO2 to pour from a keg?

Not with the WELLBOM party pump: it pours from a Sankey D-system keg with no CO2 tanks or regulators, by hand pumping. The TMCRAFT keg connects to a pressurized system and a kegerator instead.

What does NSF-approved mean for a keg?

The TMCRAFT listing states the keg is designed to food-safe NSF and ISO 9001 standards. It means the maker states the keg meets those food-safe standards.

Can I use a stout faucet for regular beer?

The MRbrew faucet is made for nitrogen-dispensed drinks such as stout and cold brew coffee, and the maker states standard beer taps cannot handle nitrogen. Remove the internal restrictor disc to use it with CO2-based systems.

More preserving guides

See every Home Brewing and Wine guide and all Harvest Guides guides.

More picks: best beer brewing kit, all grain vs extract brewing, best grain mill for beer and homebrew kettle vs stock pot.

Read next in the kitchen