Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Mirro Pressure Canner Parts: Gaskets, Gauges and Valves
Canning

Mirro Pressure Canner Parts: Gaskets, Gauges and Valves

The gaskets, gauges and valves that keep a Mirro pressure canner sealing and holding pressure, and how to match each part to your canner.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1All American 1930 Pressure Cooker/CannerAll American 1930 Pressure Cooker/Canner9.7/10View on Amazon
  2. 2Siftary 24 QT Pressure Canner with 14.5 PSI Gauge and 7-PieceSiftary 24 QT Pressure Canner with 14.5 PSI Gauge and 7-Piece9.7/10View on Amazon
  3. 3Presto 01781 23-Quart Pressure Canner and CookerPresto 01781 23-Quart Pressure Canner and Cooker9.6/10View on Amazon

A counter full of tomatoes and a pantry that needs filling are the signs that canning season is here, and mirro pressure canner parts are what keep a Mirro canner sealing and holding pressure from one season to the next. The parts that wear out are the sealing ring, the gauge, the regulator weight, the vent pipe, the air vent cover and the overpressure plug. This guide walks through each one, how to match it to your canner, and when to replace it.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Mirro pressure canner parts: the short list

Most home canners need only a few spare parts over the life of a canner. The table shows what each one does and what tells you it is worn.

Part What it does Watch for
Sealing ring (gasket) Seals the lid to the body so steam stays in Steam leaking around the lid; a ring that feels stiff, warped or cracked
Dial gauge Shows the pressure inside the canner while it runs A needle that sticks or a dial that is hard to read
Regulator weight Sits on the vent pipe and controls steam release A weight that no longer sits straight on the pipe
Vent pipe Lets steam out through the lid A pipe that is bent or blocked
Air vent cover and lock Covers the vent and locks the lid A cover that is missing or will not lock
Overpressure plug Lets pressure out if it builds too high A plug that looks worn or damaged

The sealing ring

The sealing ring is the part that wears out first on most canners. It sits in a groove in the lid and presses against the body to hold steam in. A ring that lets steam escape around the lid, or one that feels stiff, warped or cracked, needs replacing. Rings come in packs: the Ulreon 09985 ring (on Amazon) for Presto canners comes as a 2-pack, so a spare is on hand. The same listing states the ring is BPA-free food-grade silicone, heat-resistant up to 450°F (232°C). Match the ring to your canner by part number and quart size: the 09985 ring fits Presto 16, 18 and 23 quart models, and a Mirro ring needs the Mirro part number for your model. Compare gasket options in our best pressure canner gasket for Presto guide.

The gauge

The dial gauge shows the pressure inside the canner while it runs. The gauge listings here state a measurement range of 0-20 PSI, with a clear dial and a brass connector on the TZona 85772 gauge (on Amazon). A gauge whose needle sticks, whose dial is hard to read, or whose reading you no longer trust should be replaced, and your local extension office can check a dial gauge. The 85772 gauge fits a long list of Presto models, so match the part number to your Mirro canner the same way you would match the ring. See our best pressure canner gauge guide for the gauge types.

The regulator weight and vent pipe

The regulator weight sits on the vent pipe and lets steam out in a controlled way. The ANTOBLE listing sells the two together as part numbers 50332 and 85608 for Presto 16 and 23 quart models. If the vent pipe is bent or blocked, the weight cannot sit right, so check the pipe when you replace the weight, and replace both if either is damaged. Do not force a weight from another canner onto the pipe: the weight and the pipe are made to fit each other.

The air vent cover, lock and overpressure plug

The air vent cover and lock sit on the lid and cover the vent. The Mzcvriru and Hasanbar listings sell the cover and lock as a 2-pack for Presto 16 and 23 quart models, part number 85407 among others, with one to fit and one to keep as a spare. The overpressure plug is a small safety part that lets pressure out if it builds too high. If a cover is missing, or a plug looks worn, replace it before the next batch, since the lid cannot lock or vent the way it should without them.

How to match a part to your Mirro canner

Match by part number first, then by quart size. Find the part number on the lid, on the old part or in the maker manual, and compare it with the listing before you order. The listings in this guide are for Presto canners: the 09985 ring, the 85772 gauge, the 50332 weight and the 85608 vent pipe fit Presto models only, so do not order them for a Mirro canner by size alone. A part that fits a 23 quart Presto canner does not fit a 23 quart Mirro canner unless the maker states it does. Keep the old part beside the new one and compare the shape, the size and the fitting before you fit it. If you are choosing a canner as well, see our best pressure canner guide.

What this guide does not cover

This is a parts guide. It does not give recipes, processing times, pressures, headspace figures or altitude changes. Take those from current USDA and National Center for Home Food Preservation guidance, or from a current edition of a trusted canning guide, and follow them exactly for each food. Every canner and tool guide on the site is collected in our canning section.

FAQ: preserving at home

How do I know which gasket fits my Mirro canner?

Match the part number and the quart size on your canner lid or in the maker manual. The 09985 ring in the listings fits Presto 16, 18 and 23 quart models, so a Mirro ring needs its own Mirro part number, not a Presto one.

When should I replace the sealing ring?

Replace it when steam leaks around the lid, or when the ring feels stiff, warped or cracked. Keep a spare on hand, since rings come in packs of 2 and a spare saves a batch.

Can I use a Presto part on a Mirro canner?

No, unless the maker states it fits. Parts are made to a model, so match the part number to your canner. A part that fits a Presto canner does not fit a Mirro canner by size alone.

What does the gauge on a pressure canner do?

It shows the pressure inside the canner while it runs. The gauge listings here state a measurement range of 0-20 PSI. If the needle sticks or the dial is hard to read, replace the gauge, and ask your local extension office whether they can check a dial gauge.

What is the overpressure plug for?

It is a safety part that lets pressure out if it builds too high inside the canner. If the plug looks worn or damaged, replace it before the next batch.

More preserving guides

See every canning guide and all pressure canners guides.

More picks: pressure canners, water bath vs pressure canner and canning tool kits.

Read next in the kitchen