Skip to content
Independent guides to preserving gear, est. 2026

Canning, drying, storing and harvest gear for home kitchens

We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals
Presto Canning Parts: A Replacement Parts Guide
Canning

Presto Canning Parts: A Replacement Parts Guide

Presto canning parts: the sealing ring, overpressure plug, air vent lock, regulator weight and gauge that fit Presto pressure canners, and how to match each part number to your model.

On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1FORJARS Canning Lids and RingsFORJARS Canning Lids and Rings9.6/10View on Amazon
  2. 2HekouJiub Regular Mouth Canning RingsHekouJiub Regular Mouth Canning Rings9.5/10View on Amazon
  3. 3Masontops Tough Band Wide Mouth Mason Jar Screw BandsMasontops Tough Band Wide Mouth Mason Jar Screw Bands9.6/10View on Amazon

When the tomato counter is full and the canner comes out of the cupboard, a worn sealing ring or a gauge that sticks can stall the whole day. Presto canning parts are the replacement pieces that keep a Presto pressure canner (on Amazon) working: the sealing ring, the overpressure plug, the air vent lock, the regulator weight with its vent pipe, and the pressure gauge. This guide lists each part, the part number to match, and the canner models each one fits.

HarvestGearLab earns a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Presto canning parts: the short list

A short set of parts covers nearly every repair a Presto canner needs. The table shows what each one does and when to change it.

Part What it does Fits Replace when
Sealing ring 09985 Seals the lid to the body so steam stays in Presto 16, 18 and 23 qt canners Every 1 to 2 years, or when it no longer seals
Overpressure plug Vents steam if pressure climbs too high Presto canners; kits include 4-pack plugs When worn or damaged
Air vent cover/lock 409A Covers the vent and locks the lid Presto 16 qt and 23 qt models When missing or worn
Regulator weight 50332 with vent pipe 85608 Sits on the vent pipe and controls steam release Presto 16 and 23 qt canners When it no longer sits steady on the vent pipe
Pressure gauge 85772 Shows the pressure inside the canner Presto models listed below When the pointer sticks or the dial fogs

Start with the part number, not the size

Presto canners come in 16, 18 and 23 qt sizes, and the same size can hide different parts, so the part number is what matters. Find the model number on the canner, then match it to the part: sealing ring 09985, air vent cover/lock 409A, regulator weight 50332 with vent pipe 85608, and pressure gauge 85772. A part that fits one model may not fit another, even when the canners look alike. Our how to use a Presto pressure canner guide walks through the canner itself, part by part.

Sealing ring 09985

The sealing ring is the part that wears out soonest, and it is the part to check when steam leaks around the lid. Ring 09985 fits Presto pressure canner models 0174510 (16 qt), 0175107 (18 qt), 0175510 (16 qt), 0178107 (23 qt), 0178209 (23 qt) and 0178410 (23 qt). The listings describe food-grade silicone, BPA-free, heat-resistant up to 450°F (232°C), flexible and tear-resistant. The Ulreon kit comes as a 2-pack of rings with 4-pack plugs, so there is a spare ring on hand.

The listing recommends replacing the gasket every 1 to 2 years. To fit a new ring, remove the old ring and plug, clean the groove, then work the new ring into the lid a small section at a time until it sits fully in place. Open and close the lid several times to make it move freely. Compare ring options in our best pressure canner gasket for Presto guide.

Overpressure plug and air vent lock

The overpressure plug is a small rubber safety device that vents steam if the pressure inside the canner climbs too high. Kits for the sealing ring often include spare plugs, and the plug pushes into its opening from the underside of the cover, round side marked “TOP” facing out. Change it when it looks worn or no longer seats firmly.

The air vent cover/lock, part 409A, covers the vent and locks the lid. Listings for the 16 qt and 23 qt models describe it as a manufacturer replacement that is functionally equivalent to earlier parts, including 24033, 29008, 33006 and 85407. Packs hold 2 pieces: one to fit and one to keep for later. Parts made for All American canners do not fit Presto canners, so match the part number before ordering; our Presto vs All American pressure canner comparison shows how the two brands differ.

Regulator weight and vent pipe

The regulator weight and the vent pipe work as a pair, and listings sell them together as part 50332 with part 85608. The vent pipe fits through the cover, and the weight sits on top of it to control steam release. The weight is a 3-piece regulator: rings stack on the weight to change the setting. If the weight is lost or the vent pipe is blocked, replace both together so the pair matches. The listing states compatibility with Presto 16 and 23 qt canners, including models 0174001, 0178107, 0178410 and 0175510.

Pressure gauge 85772

The pressure gauge shows the pressure inside the canner while it runs. Gauge 85772 replaces part numbers 85772, 82237 and 82121, and fits Presto models 01/CG22, 175001, 175005, 175006, 175107, 01755, 0175510, 178001, 178005, 178006, 178107 and 178410. Listings describe a transparent dial with a steady pointer and a measurement range of 0 to 20 PSI, made from high-temperature resistant alloy and plastic, with a brass chrome plated connector.

To fit a new gauge, put the silicone gasket on first, then the stainless steel gasket, and screw on the nut under the lid. Tighten it so steam cannot enter the dial. Our best pressure canner gauge guide compares gauge options by fit and dial range.

What this guide does not cover

This is a parts guide. It does not give recipes, times, pressures or altitude changes. Take those from current USDA and National Center for Home Food Preservation guidance, or from a current edition of a trusted canning guide, and follow them exactly for each food.

FAQ: preserving at home

Which sealing ring fits my Presto canner?

Ring 09985 fits Presto 16, 18 and 23 qt canners, including models 0174510, 0175107, 0175510, 0178107, 0178209 and 0178410. Check the model number on the canner before ordering.

How often should I replace the sealing ring?

The listing recommends replacing the gasket every 1 to 2 years, and sooner if steam leaks around the lid or the ring looks worn.

What does the overpressure plug do?

It vents steam if the pressure inside the canner climbs too high. It is a small rubber safety device that pushes into its opening from the underside of the cover.

Do I need a new vent pipe with the regulator weight?

The two are sold together as part 50332 with part 85608, and they work as a pair, so fit both at once when either one needs replacing.

Which gauge fits my Presto canner?

Gauge 85772 replaces part numbers 85772, 82237 and 82121, and its dial range is 0 to 20 PSI. Check that the canner model is in the fit list before ordering.

More preserving guides

See every pressure canner gauge guide and the how to use a Presto pressure canner guide.

More picks: gaskets for Presto, pressure canner gauges, Presto canners for induction and Presto vs All American canners.

Read next in the kitchen